Anyone ever dent their lipo's??? -
05.13.2008, 10:42 AM
I dented one of mine off a nasty jump the other day, I didnt even realize it until two cycles later. Anyways the zippy-R 4s 4500mah still works good even though its dented. Should I expect any problems from this battery in the future? ( The battery doesnt seem like its puffed at all. )
I had the battery totally wrapped in my battery tray with 1/4" foam rubber, I just ordered some 1/2" foam rubber to give it more protection.
Anyone ever dent their lipo, what was the result???
I think that may depend on the size of the dent. I would suggest monitoring lipos constantly anyway. I think if it is not puffed now after 2 cycles with the dent then it probably will be fine. If it does turn out to be a problem you can always take the dented cell off and run it with one less cell. I have had many many maxamps packs and i would get puffed cells and just make new ones out of the remaining good cells. Out of 2 2s and 1 3s i am left with 1 4s. So out of 7s i have 4s left. But i will say once i sorted out the bad cells the 4s has been running good ever since. Oh and if some says you don't need to balance well i am here to say you do. I trashed a nice thunder power 3s because it was not balanced, i know balance every time.
I have dented a few and I watched them carefully, but after a couple days I charged them up and they are running good still. I heard of guy who bent lipos a little and they still work perfectly. The big problem would be if the pack has a puncture.
about balancing your lipos, just think of not balancing new tire on a car, it will work for a while, but evantually wear and take out other components, balancing is so effortless, its worth it to do every time
about balancing your lipos, just think of not balancing new tire on a car, it will work for a while, but evantually wear and take out other components, balancing is so effortless, its worth it to do every time
I've dented a smaller lipo and as long as its not "accordioned" with a number or so really small, sharp folds, I think you're fine. Denting one really bad you'll see some loss cause that area doesn't seem to contribute to the amp flow anymore. I got pretty much normal life out of my dented one compared to others. I did same thing you're doing - more protection.
About a week later was running around climbing a debris pile (construction site) and managed to puncture one - I was lucky, I was standing right there and ripped shell off and tossed batt soon as I saw smoke. Would have melted chassis otherwise. Also got me a visit from site security guard due to all the smoke. Fortunately he had a sense of humor and we had a good laugh.