traxxas slayer

[emaxxracer15]

the truck looks pretty sweet, too bad its stinkin' nitro it will be brushless conversion central as soon as mike comes out with a motor mount for it

[lincpimp]

Originally Posted by emaxxracer15

the truck looks pretty sweet, too bad its stinkin' nitro it will be brushless conversion central as soon as mike comes out with a motor mount for it

It is a revo, so anything that we use to convert a revo will work with the slayer.

You know what I don't understand is why?,other then racing in a class with others.Could you please explain what your thinking of doing with it.It's basically a narrowed 2.5 revo.Now if they release a chassis that shortened it to about stampede size I'd be on it.

[DRIFT_BUGGY]

Be nice if AE brings out one and Kyosho bring out another one but this time based on the ST-R chassis

it will be indestructable tho, a revo is already tough.. shorten the wheelbase, give it tiny wheels, and you will never break it

[JThiessen]

I'd like to get that body for my Revo, and a set of those tires. I like the looks of it.

I was at the LHS last weekend, and they had one of the Slash's there. That suspension was very soft and supple and lots of travel....(hope Linc doesn't see that comment)...

[lincpimp]

Originally Posted by big greg

it will be indestructable tho, a revo is already tough.. shorten the wheelbase, give it tiny wheels, and you will never break it

I thought the same thing...

Not knocking anyone,just confused when you think about it.It has the same wheelbase as the 2.5 revo,but it's 4 inches narrower.I normally try to widen my stuff out to handle better.When I first saw the truck I was excited the more I looked and thought ,I just don't get it. Someone please come out with a conversion chassis that shortens the wheelbase to about 10 inches,and adds brushless. Then run a ST body and 3s lipo and I'll get it.

[emaxxracer15]

^^^ it is not designed to handle mlike a monster truck, because it is not a monster truck. it is supposed to be a scale rc truck and it drives like the real version and i think thats all that matters. just my 2 cents.

[lincpimp]

Originally Posted by emaxxracer15

^^^ it is not designed to handle mlike a monster truck, because it is not a monster truck. it is supposed to be a scale rc truck and it drives like the real version and i think thats all that matters. just my 2 cents.

I have a feeling that it will be very fun to drive. Looks like the suspension is lowered a bit, so the cg should be considerably lower than a revo. Maybe closer to a buggy. It should be better at mixed bashing than a buggy, if not as stable. The full body is my favorite. How much bigger is it going to be than the slash? Is it any bigger?

[lincpimp]

Its the same size as the slash...

[emaxxracer15]

Originally Posted by lincpimp

I have a feeling that it will be very fun to drive. Looks like the suspension is lowered a bit, so the cg should be considerably lower than a revo. Maybe closer to a buggy. It should be better at mixed bashing than a buggy, if not as stable. The full body is my favorite. How much bigger is it going to be than the slash? Is it any bigger?

my thoughts exactly. it will be a blast to drive on dirt. the 4wd will help with drifting

[TruckBasher]

I'm no expert as I understand it is narrower but if you consider that it also has lower CG due to the reduced tire diameter. it will handle differently from a Truggy or MT.

A good sway bar would help improve handling....

OT:
Anyone knows if I can fit the 12mm Hex hub and Wheel/tire of Slash to an E-Revo? I plan to put those tires and some 1/8th scale on-road car body to make a sort of E-Slayer....

[BrianG]

I was excited at first too, but the more I look at it, the more I think a modded buggy would be better. Even cheap ones are pretty bullet-proof out of the box. The Revo needs a bit of work to get there. The only downsides to using a buggy platform would be the tires (but buggy tires are close), coming up with a body mount (easy), and coming up with a bumper mount.

Also, did anyone catch that the Slash wheelbase is actually longer than the Slayer? The wheelbase of a Slash is close to a buggy.

I'm probably going to pick up a cheap buggy kit (Ofna MBX?), give the suspension a little more travel (and make it sit a tad higher), and do the normal conversion process. Slap a Slash body, make body mounts, and make bumper mounts/ Should be cake to do and a whole lot simpler IMO...

[lincpimp]

I have a spare revo, so I will pick up the bumpers, body and arms, and maybe the wheels. Or I will run some buggy wheels with 17mm adapters...