need help pls!!!

[satan'struck]

hi guys, i'm from Hong Kong and just got an E-Revo few days ago...well, i got a Tekno 1515 1y/f and a mgm 16018, just wondering if this setup is OK,or NOT??? btw, i'll use two 8.4v(7cell) eastpower 4600 batteries! thanks

[mkrusedc]

Should be no problem at all for that esc and motor.

[satan'struck]

thanks mkrusedc!!! btw, if i'm just going to use two 7 cell(4500mAh) eastpower batteries(NO LIPO FOR ME CAUSE IT'S TOO DANGEROUS!!!), how fast you think it'll be??? and since i'm still waiting for the USBCOM+ to be in stock, is there anyway to program the MGM 16018(except to use the radio program cause it's kind of hard and it take too long for me)!!! also, what i need to order for the 16018 programming beside the USBCOM+ and the CC-02 CABLE??? thanks again for your time and help!

[JThiessen]

Go to http://www.scriptasylum.com/rc_speed/index.html. Click on the speed calculator.....it will give you more info than you need.

[mkrusedc]

Those are the only cables needed. Search this forum somebody posted an easy to read explanation on how to program it using the transmitter. I have only used the cables so i can't help with that. good luck.

I found it. read the first post.

http://www.rc-monster.com/forum/show...ht=program+MGM

[satan'struck]

thanks alot guys, will try that and see what's up!

[Semi Pro]

the only problem i see is that you will be over taxing the batterys alot

[rc!!!]

seems fine, just you may want to upgrade the batts, soon... they will heat up as fast as you can start a nitro!! LOL

[satan'struck]

OK guys, will think about the batts upgrade!!! btw, my E-Revo will be a HR Version(Hot Racing)! well, i'm almost done with it, and when i'm all done with my E-Revo.....i'll post some pics up the forum!!! anyway, thanks again for all the time and help from you guys! best regards!!!!!!