Will disconnecting the red wire also disable the fan on the MMM? - RC-Monster Forums

pasan

I've got a 5A BEC that I'd like to use in my E-Revo to power a 20KG servo, but would disconnecting the red wire also mean the MMM's fan is disabled too? Thanks.

George16 · 01.18.2009, 08:42 AM

No it does not disable the fan.

pasan · 01.18.2009, 09:10 AM

Great, thanks!

brushlessboy16 · 01.18.2009, 09:59 AM

The mmm bec should power that servo fine tho.

pasan · 01.18.2009, 10:23 AM

It should? I was told that the MMM BEC puts out something like 5.5V, and I need 6V for it to work well.

brushlessboy16 · 01.18.2009, 11:05 AM

iirc v3 puts out 6v.

pasan · 01.18.2009, 12:15 PM

I've got a V2.

padrino · 01.18.2009, 03:02 PM

Quote:

Originally Posted by pasan

I've got a V2.

Others will know better then I do but I think it may be worth exchanging the V2 for a V3. I do not know if CC did it only on failures but even if you have had good luck it may put you in a better position since teh V3 is more reliable, and as said above provides 6V.

01.18.2009, 03:17 PM

I think that when you disconnect the red wire with the MMM the onboard BEC will continue to work...not like the MM