RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Castle Creations

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#1)
Finnster
KillaHurtz
 
Finnster's Avatar
 
Offline
Posts: 2,958
Join Date: Apr 2006
Location: Bucks Co, PA
05.29.2007, 09:53 AM

Hey man, nice vid :) If you like that one, click the one in my sig. That's on 5S, and its faster than Jesus. Too fast really for most things. I mostly drive on 4S now.

The ESC does well on 14 cells. I've ran 16cells, then later 5S, and even that was ok, but 5S is a bit nutty. Really the larger challenge has been keeping the motor cool vs the ESC.

My v1 ( 2.5 w/ Emaxx tranny, as shown in vids) weighed 4.3kg (9.5 lbs) w/o batts. My v2 (3.3 chassis, revo tranny, man brakes) weighs 4.2KG (9.25 lbs) w/o batts. These are stock otherwise, inc talons. I do have some Ti parts and red rods coming in, so this will drop a bit more on v2, but only so much. As cajun said, there is not a whole lot else to trim. Slayden (TRX) races his 3.3 @ 9.5 lbs RTR, so I wouldn't expect to cut too much. If the TRX team can win championships at that weight, its prolly fine IMO. :)

The biggest weight diff in RTR will be the batts. High end lipos weigh as little as ~450g for a 4S ~5000 mah. My TrueRCs weigh more, 4S 6400 is ~700+g, while the 5S 8000 mah tops 900+g. The huge power and TQ of BL makes up for the slighly heavier weight IMO.

Lastly, My FDR is ~16.2:1 +/- .3. Generally on v1 I run 15/51. V2 is a little higher at 16.3, but I'm still playing with the gearing.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com