Quote:
|
Originally Posted by AAngel
zpb, I had my motor for a short time, before I sent it back to Neu. Although I did have the suspicion about it being a mislabeled motor, when I geared it right it ran very well.
It had no troubles pushing my 10.5lb truggy around with authority on 5S lipo. I was able to get the temp on the motor up to around 165, but I was dogging it like I'd never dog it when either bashing or racing. I was trying to make it overheat, and couldn't.
The Neus are dynamite motors.
In fact, I'm thinking of picking up a 2600kv model for my buggy, which I do nothing but speed runs with now. I just need a motor to run with my Compro.
|
Yeah, when you get your Neu back you must mate it up to your Quark again and let me know how it runs okay? Run it on 4s lipo, and run it as hard as you can, the max temp it gets here in the summer is roughly 35c, but usually 25-30c. So if I can get a good idea of how cool it runs down in the hot hot south, then it will only run that much cooler up here.
I might just get the same 1.5Y motor as you.
Threaded Mode
