My CRT.5 conversion

[IBJAMMIN]

The Proline buggy 2.2 wheels have to much of an offset to fit they hit the lower a arms the 2.2 Asc truck wheels need a little triming on the ribs inside the wheel to clear when turning I have not ran the larger truck tires because I dont think the steering servo can handle them I burned up a servo with the Jaco RC10t foams already to much grip I guess?

I have broken 2 rear hubs and cracked the dust shield on the front C hubs the steering knuckles have held up fine though that and the brittle ball ends are the only weak spots I have found in the CRT.5. :)