Motor + batterie setup for crt.5

OK James, that's the setup that i've think about. But for the lipo pack, is the 4000 maxamps is good and have good punch??
Is somebody have ever try the E-Cell??? $120.00 for a 14.8volts 4000 mAh, 25C pack

[VintageMA]

Go for the MaxAmps 5000mAh 3s pack - fits perfectly on one side of the buggy. Pair that with a motor around 3000kv and you'll be all set for a ~40mph gearing with either 16/46 or 17/46.

Go for an L size can - the crt.5 is not a light buggy for it's size and you'll appreciate the punch.

Check out my setup - temps are really good and performance rocks!
http://www.rc-monster.com/forum/showthread.php?t=7478

Runtime bashing will be easily 20 - 30 minutes.

OK i've just order a feigao 12L and a maxamps 4000mAh, 14.8 volts, and with a 18 tooth pinion.
Suppose to be around 38-39 mph with stock tires.

[lincpimp]

You will be happy with that setup, just make sure to run a UBEC, the MM will thanks you for it.