CRT.5 Finished - RC-Monster Forums

rschoi_75 · 10.10.2007, 08:53 PM

great looking conversion dude. I gotta say that these things are awesome trucks.

About your battery mount though... you're going to need something to stop the battery from popping out from the top in a crash. Mine is similar, and needed one too. A simple "L" shaped bracket does the trick nicely.

Hey Dafni... does this mean you're willing to paint some bodies? I could use a buggy body...

10.10.2007, 09:06 PM

Sweet! I like it! Very clean...

I remember when mine looked like that, but like most of my RC's, it turned into a "Frankentruck" (i.e. ext.chassis and 4s lipo).

Although it is one of my better creations...

Bye

jhautz · 10.10.2007, 09:18 PM

Thanks for the kind coments guys.

Quote:

Originally Posted by rschoi_75

great looking conversion dude. I gotta say that these things are awesome trucks.

About your battery mount though... you're going to need something to stop the battery from popping out from the top in a crash. Mine is similar, and needed one too. A simple "L" shaped bracket does the trick nicely.

Hey Dafni... does this mean you're willing to paint some bodies? I could use a buggy body...

I am planning to put a layer of velcro on the face to the CF plate and on the back of the lipo. The velcro and the strap should be plenty to hold that battery in place. I have a similar system in my 1/8 buggy and I actually forgot to close the strap once and ran an entire pack jumping and crashing with only the velcro and tray holding it in place. I only realized I forgot to close the strap after I ran the entire pack. Its amazing how strong that stuff is if you have enough surface area. I just need to get to the store to pick some up.

And I bet Daf is up for doing custom paint work. I asked him to do a body for my Revo and it turned out AMAZING! I was actually going to post a thread on it, I just havent gotten around to it yet. I'll see if I can snap a couple pics soon so you can see the work he did for me. That man has more atristic talent in his little toe than I have in my whole body. He does really nice work.

Dafni · 10.11.2007, 03:26 AM

Quote:

Originally Posted by jhautz

And I bet Daf is up for doing custom paint work. I asked him to do a body for my Revo and it turned out AMAZING! I was actually going to post a thread on it, I just havent gotten around to it yet. I'll see if I can snap a couple pics soon so you can see the work he did for me. That man has more atristic talent in his little toe than I have in my whole body. He does really nice work.

Oh come on, J. Now YOU must be playing

Thank you for the kind words! But I feel I have a lot to learn still, and honestly I only just started... picked my first airbrush up this past april. I want to get better and better.

jhautz is right, I'd love to do more paint jobs for RCM Members. Any requests are more than welcome. Here you can see my GALLERY

Thank you!
Daf

jhautz · 07:25 AM

The yellow and black w/ligntning Dessert Rat in Dafs gallery is now proudly mounted on my Revo.

Thanks again Daf.

Dafni · 10.11.2007, 07:27 AM

You're welcome Mr Hautz, was a pleasure. Now post a pic!

The other Desert Rat, with electricity all over and the RCM Logo, is now in Mikes' possesion. As is the RC8 with the same sceme, look for it at the iHobby show

Thank all of you! Maybe I should start a thread here, to let people know I can paint for them??

Daf

jhautz · 10.11.2007, 07:29 AM

I'll get a pic taken and posted soon. I promise.

And yes, it would probably be a good idea to start a thread and link it to your gallery.

Finnster · 10.11.2007, 03:18 PM

Quote:

Originally Posted by Dafni

Oh come on, J. Now YOU must be playing

Thank you for the kind words! But I feel I have a lot to learn still, and honestly I only just started... picked my first airbrush up this past april. I want to get better and better.

jhautz is right, I'd love to do more paint jobs for RCM Members. Any requests are more than welcome. Here you can see my GALLERY

Thank you!
Daf

Daf's bodies are awesome, he brought several to the RCM bash, and everyone was sweet. Conversion master and body artist as well!

Truely a renaissance man :)

ClodMaxx · 10.11.2007, 03:53 PM

Quote:

Originally Posted by Finnster

and everyone was sweet.

shucks, i didn't need to go to the RCM bash to know that...

VintageMA · 10.11.2007, 10:36 PM

Nice job - I remember that you and I had pretty much the same setup going (motor, esc, 3S batteries). How are your temps doing?

I have been running 17/46 and the speed is pretty potent. I have the 18 and 20 pinions and would like to try them.

My esc temps have been around 140*, but I was using the MM BEC with 3S so that could explain. Just got the CC-BEC so waiting to get a chance to run it again to see temp are better.

Peak power has been 722 watts at a peak current of 72Amps.

Also, how are those tires doing. How is the ballooning at top speeds? I have the Dirt Hawgs and they balloon pretty bad at speed, I'd really like to find something that can handle the speed better.

jhautz · 11:22 PM

Quote:

Originally Posted by VintageMA

Nice job - I remember that you and I had pretty much the same setup going (motor, esc, 3S batteries). How are your temps doing?

I have been running 17/46 and the speed is pretty potent. I have the 18 and 20 pinions and would like to try them.

My esc temps have been around 140*, but I was using the MM BEC with 3S so that could explain. Just got the CC-BEC so waiting to get a chance to run it again to see temp are better.

Peak power has been 722 watts at a peak current of 72Amps.

Also, how are those tires doing. How is the ballooning at top speeds? I have the Dirt Hawgs and they balloon pretty bad at speed, I'd really like to find something that can handle the speed better.

I havent really run it yet. I just finished it on Monday so hopefully this weekend it will get a good test run. I'm pretty sure it shoud be OK on temps. I was running my Lightning Staduim 10 on this motor w/ a MM and 4s a123 for a while and temps were fine. I was using a UBEC on the MM and have a UBEC set up on the crt.5 too.

I also run these tires on the LS10 and they actually handle pretty well so I bought a set for the crt.5 too. Balooning isnt to bad, Traxxas sells these for use i=on the VXL Bandit which can run 70mph, so 45 should be no big deal for them. I'll let you know how it runs after I get it out and give it a workout.

How does your Hacker 8L do on temps?