Does anyone have a NON-working Quark 60, 80, or 125 they want to sell?

[sikeston34m]

I need one to dissect for part identification. I really don't want to do this to my good 80 amp.

I'm waiting on just a few more parts and it is going in my New E Revo.

Non working, abused, in parts, doesn't matter. I just need to identify components.

Any help would be appreciated.

Thanks.

[brijar]

I have a non working Warrior 9920 that I would be willing to sell, if that would work instead. Let me know if you're interested. Seems mostly intact. I think it's just the FETs that had trouble.

Brijar!!!

[sjcrss]

I also have a NON working BK 2095 Micro controller as well....that i could let go......if i didn't have to send in my 1st smoked quark, but i got it replaced under warranty....it only lasted 20 min.....or i would send it your way...let me know

[sikeston34m]

Originally Posted by brijar

I have a non working Warrior 9920 that I would be willing to sell, if that would work instead. Let me know if you're interested. Seems mostly intact. I think it's just the FETs that had trouble.

Brijar!!!

I'm really interested in the Quark.............sorry Brijar.

This is for a project that I'm working on and I need the driver fet numbers so I can do so me calculations.

[sikeston34m]

Originally Posted by sjcrss

I also have a NON working BK 2095 Micro controller as well....that i could let go......if i didn't have to send in my 1st smoked quark, but i got it replaced under warranty....it only lasted 20 min.....or i would send it your way...let me know

I would really go for a Quark.

I tried looking up the specs on that BK 2095 and I can't find them anywhere.

Do you know where I can peek at that one?

[sjcrss]

when you say specs, are you wanting the spec #'s..... like this...

2095 / BEC MicroCar [2000314] $450,99 [incl. 19% Tax excl. Shipping]

Click to enlarge 2095 / BEC MicroCar 95 Ampere 4 to 20 Cells 3Amp.BEC on/off Function 40 gram (without Part) 70x30x12 mm Forward-Backward-Brake with RC-Car Software radiatior 4 Capacitors all BK-Controllers are made for 2 pol brushless motors ! The max. Cells is calculated with 1,2V per Cell. The Controllers are useable with LiPo Cells.

[sikeston34m]

Originally Posted by sjcrss

when you say specs, are you wanting the spec #'s..... like this...

Sorry, I guess I'll pass on that one too.

I really want the Quark because it works with multi pole motors. Thanks for asking though.

[sjcrss]

Ok. NP...

[lutach]

I have a Quark 125, but the power board is in really bad shape. I'm also not sure if he controller board is working.

[sikeston34m]

Hi Lutach,

That's the kind I'm looking for. I really just want one to take apart, study and look up all the specs on the Gate Driver FET's. Things like that.

PM me.

Thanks

[lutach]

Here are some pics.

[lutach]

and 2 more.

[sikeston34m]

Yep, that's a Non working Quark alright. Yikes. How did this happen?

What was the setup you were running at the time she blew?

Yes I'm interested. I think this will serve the purpose that I need. (with a little goo removal......lol)

[lutach]

Originally Posted by sikeston34m

Yep, that's a Non working Quark alright. Yikes. How did this happen?

What was the setup you were running at the time she blew?

Yes I'm interested. I think this will serve the purpose that I need. (with a little goo removal......lol)

I had it in a Ofna buggy and I was running 6S (2 3S 4000mAh Maxamps) and Hacker C50-13L. It ran amazing a few times, but one day it just smoked. To be honest, I don't like the way Quark has the positive and negative on the same side and right on top of each other. The only problem is, I have to find it first. I'll try to look for it today, if my daughter lets me. She's got a cold.