BL system for a crt.5 on 2s

Looks sweet man! Stinks about the MM, but atleast your getting a new one =)

[rchippie]

Thank you for posting the pics & the comment .

[ssspconcepts]

Originally Posted by rchippie

Thank you for posting the pics & the comment .

Hippie,

You did a great job with you battery tray...you should sell those. I ended up using the Tekno RC Revo battery tray on my CRT.5 EXT Chassis. I got lucky because the bolt pattern matched up perfectly.

[t-maxxracer32]

that looks extrememly clean sssp very nice work.

gotta love mikes chassis.

[BL_RV0]

hey sssp what tires are those?

[glassdoctor]

Anyone have a pic with the extended chassis crt.5 next to a 1/10 truck like a T4 or Rustler?

[ssspconcepts]

Originally Posted by t-maxxracer32

that looks extrememly clean sssp very nice work.

gotta love mikes chassis.

Thanks but the credit really goes to Mike...I just assembled it.

The tires are Proline 2.2 Dirt Works.

[ssspconcepts]

Originally Posted by glassdoctor

Anyone have a pic with the extended chassis crt.5 next to a 1/10 truck like a T4 or Rustler?

Well...this is the best I can do...I don't have any 1/10 scale cars except for my FLM Maxxs. These are the two projects that I am working right now...just need a few more parts to make them run.

So here are a few pics of my Extended Chassis CRT.5 next to my 1/8 CRT Pro. I have also attached a pic of the Ext CRT.5 next to the body I am planning on using...its a 1/10 scale JConcepts Nitro Rustler body (approx 15.75" long). If you are looking to put a body on the EXT CRT.5, try to find one that is about 14.75" to 15" long...this was the best I could do. I would appreciate any info on 15" long bodies if anyone here knows of any....

[GO-RIDE.com]

Ssspconcepts,

I was thinking of getting one of those Tekno battery boxes for my CRT.5 (RCM ext chassis), but it looks like it sticks out a lot over the edge of the chassis? Does this cause any problems with the body?

Does anyone know if the RCM battery box is narrower than the Tekno?

Go, No it doesnt, the bodies are wide enough to clear the batt tray

[rchippie]

Originally Posted by ssspconcepts

Hippie,

You did a great job with you battery tray...you should sell those. I ended up using the Tekno RC Revo battery tray on my CRT.5 EXT Chassis. I got lucky because the bolt pattern matched up perfectly.

Thank's Your ext.5 looks great . im still using the stock chassis.

is that a jconcepts T4 body that you are running on your crt.5??

[ssspconcepts]

Originally Posted by BlackedOutREVO

Go, No it doesnt, the bodies are wide enough to clear the batt tray

I am also going to use a Rustler Nitro body...it has a slight bulge for the exhaust (where the battery tray now is). I had to order some longer body mounts...took forever to find them but I eventually found some that will work.

[ssspconcepts]

Originally Posted by rchippie

Thank's Your ext.5 looks great . im still using the stock chassis.

Your car must FLY! You are running 5000kv right? I just tested mine with the 4500kv neu and 3S...it is-as you said-a fast little sucker!

[ssspconcepts]

Originally Posted by entjoles

is that a jconcepts T4 body that you are running on your crt.5??

Mine is a Jconcepts Nitro Rustler body.