Quote:
Originally Posted by JeffEmbracedDC
...Apparently a long time ago I soldered on little 1" extensions of Deans 12awg to the windings and heatshrinked over them because the 3.5mm bullets wouldn't fit over the ends of the windings. The solder wicked up the short extensions making them very hard. When I tried to bend these it broke at the solder joint at the END of the winding.. meaning #1 my windings are in tact and #2...
|
Yeah, that would do it. Several strands of wire can bend, but if soldered together, it is effectively one large wire and won't bend easily withough breaking. I believe I was one of those who suggested bending them, and for that I'm sorry.
I would not try it as is. If you know it's broken, there's no sense in damaging an ESC. Believe me, all three wires are necessary.
Threaded Mode
