RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > General Electric

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old
  (#5)
nativepaul
RC-Monster Aluminum
 
nativepaul's Avatar
 
Offline
Posts: 522
Join Date: Jan 2007
Location: Sussex, England.
03.22.2008, 03:58 PM

Hehe sorry, my mind was in english mode not thinking I was posting on an american forum, I forgot that in the states if I say oval racing you probably think of nascar with mile+ long ovals where they take the (banked) corners at 200 mph with no braking and little acceleration required, in europe full scale oval racing is done with stock cars on a flat track of similar size to a running track with hard breaking to slow and sideways corners and hard acceleration to about 100 down the straights.

A two pin oval the size I run is not constant speed but hard acceleration followed by hard braking and a sideways corner repeated at very short intervals, I doubt there is a way to punish your gear more than doing the same with traction compound on your tires, my peak amps are around 120 under acceleration but runtime is a better indication of how hard you are pushing things, 10 mins from my 4350mah pack is 4.35x60/10=an average current of 26.1 amps, what runtime do you get on your 4000mah packs? If its more than 9.2 mins my average current draw is higher.


Hot Bodies Lightning 2 Pro carbon, Mega 22/30/2, MMM, 4s3-5Ah.
Tamiya F201 carbon, Mamba 7700, MM, 2s A123 2.3ah.
Xray XT8, 1518, MMM, 4s5Ah.
Lots of boats.
fastelectrics.net

Last edited by nativepaul; 03.22.2008 at 04:04 PM.
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com