Most powerful motor for savage?

[lincpimp]

How about a 11xl, or anything else large with about 1600kv, like a 1515?

I am going to run a KB45 8xl, 1700kv, on 6s lipo in a crt conversion. Should be a bit lighter than your savage though. I have the same savage as you and will most likely use a 14xl on 8s lipo.

[Takedown]

Originally Posted by lincpimp

How about a 11xl, or anything else large with about 1600kv, like a 1515?

I am going to run a KB45 8xl, 1700kv, on 6s lipo in a crt conversion. Should be a bit lighter than your savage though. I have the same savage as you and will most likely use a 14xl on 8s lipo.

Linc, have you ran your kb45 8xl yet? I am looking into getting on for the savage. Needs a boost in power.

[lincpimp]

Originally Posted by Takedown

Linc, have you ran your kb45 8xl yet? I am looking into getting on for the savage. Needs a boost in power.

I have not ran the 8xl, but I have run the 10l on 4s lipo in my gtp. It has tons of power and does not get hot, barely warm after 20mins or so. I have no idea how powerful the xl motors will be. I plan to run the 8xl on 6s in the crt, and the 10xl will be run on 8s in an aftershock. Looking at the interior of these beasts, and the performance of the l can in the gtp, I have a feeling these will easily blow away an xl feigao.

[Takedown]

Originally Posted by lincpimp

I have not ran the 8xl, but I have run the 10l on 4s lipo in my gtp. It has tons of power and does not get hot, barely warm after 20mins or so. I have no idea how powerful the xl motors will be. I plan to run the 8xl on 6s in the crt, and the 10xl will be run on 8s in an aftershock. Looking at the interior of these beasts, and the performance of the l can in the gtp, I have a feeling these will easily blow away an xl feigao.

Thats great to hear because I have the Feigao 8xl and I need a low end power boost and it looks like the KB45 8xl is my answer.