Suitable kv's for a Vendetta on 2S ?

[skellyo]

Originally Posted by lutach

Go with a Hyperion YC22S-5000 or YC22S-6000 with a Mamba or Quark esc.

Actually, he needs one of the YC22L style motors as they have a 2.3mm shaft for the metric 48P pinions the Vendetta uses.

[lutach]

Originally Posted by skellyo

Actually, he needs one of the YC22L style motors as they have a 2.3mm shaft for the metric 48P pinions the Vendetta uses.

He can use pinions made for the MLST. They are also 48P. In the picture of my Mega in my MLST you can see I the two pinions from the different motors. http://www.rc-monster.com/forum/atta...8&d=1204310439. The HP-YC22L-5000 would be perfect too with the pinions you mentioned.

[rchippie]

Which one of them would be good for 4s in my jammin buggy ?.

what do you think of this one for 4s medusa mr-36-2200v2-5

[skellyo]

Originally Posted by rchippie

Which one of them would be good for 4s in my jammin buggy ?.

What are you, a newB or something? Everyone knows the Mamba 8000 is the bestest motor you can get for anything cuz the high kV means it's powafulllllll!!!!!111!!!111!!!!!11!!!

[rchippie]

Originally Posted by skellyo

What are you, a newB or something? Everyone knows the Mamba 8000 is the bestest motor you can get for anything cuz the high kV means it's powafulllllll!!!!!111!!!111!!!!!11!!!

your funny . I was'nt sure because i have never looked at the chart before. I do know right around 2000 kv is the sweet spot for 4s. But they have two or three motors around 2000 kv . So i was'nt sure.

[lutach]

Originally Posted by rchippie

your funny . I was'nt sure because i have never looked at the chart before. I do know right around 2000 kv is the sweet spot for 4s. But they have two or three motors around 2000 kv . So i was'nt sure.

Not for the little guys. The sweet spot is above 50000rpm so 4S lipos I would look into a 3500Kv. We are still talking about 1/18 scale right?

[rchippie]

I just noticed there longest motor is only 60mm long. My 9xl is over 70mm long. Would,nt that affect the amount of torque ?.

[skellyo]

Originally Posted by lutach

He can use pinions made for the MLST. They are also 48P. In the picture of my Mega in my MLST you can see I the two pinions from the different motors. http://www.rc-monster.com/forum/atta...8&d=1204310439. The HP-YC22L-5000 would be perfect too with the pinions you mentioned.

The MLST pinions aren't metric 48P, that's the problem. They're standard 48P, just like on all the Mini-T variants and RC18 variants.

[lutach]

Originally Posted by skellyo

The MLST pinions aren't metric 48P, that's the problem. They're standard 48P, just like on all the Mini-T variants and RC18 variants.

That's odd. I thought 48 pitch is standard "Inch Unit" and Metric doesn't come in pitch, but module. So it'll be like a MOD 0.5. I'm lost, help . Anyways with 2S and the 2.3mm shaft, I would go with the HP-YC22L-5000, but I would also look into a Neu 1107/1.5D (8500Kv) with the 2.3mm shaft option.