Help Anyone with an LSP

[Arct1k]

Which screws go through the FRONT SUSPENSION HOLDER to attach it to the diff - The care I bought from someone here doesn't have any screw and arms are all over the place!

http://www.hotbodiesonline.com/produ...hbc8078-1.html

Exploded views from HB are hopeless as don't show hardly any screws.

I'm guessing I need either:

http://www.hotbodiesonline.com/products/en/hbc8110.html

or

http://www.hbeurope.com/piw.php?partNo=hbc8217&lang=en

HELP! my new Neu 2.5D is sitting idle!

[Arct1k]

Pretty Please!

[lincpimp]

Wish I still had one, I would take a look for you!

[Arct1k]

It is your one that is missing the screws :) Must be someone - their manuals are really bad!

[lutach]

When I changed my diff last week, the screw that I held that part of the front arm holder was a long one.

[Arct1k]

Was it a machine screw or something that looks like a wood screw?

[lutach]

Originally Posted by Arct1k

Was it a machine screw or something that looks like a wood screw?

Looks like a wood screw.

I just took the screw out of the front suspension holder the one by the steering servo and its a socket head 3x14mm. I believe the ones in the front is the same size too. This kit: #HBC8217 is for the front and rear and the rear use the 2 longest sets. Make sure you use the long ones by the rear bumper and the 2nd longest ones in the other end. I switch those two around last time I took my diff apart and the longest screws was hitting my rear diff. Those screws are machine screws btw.

[lutach]

Originally Posted by Arct1k

Was it a machine screw or something that looks like a wood screw?

PM me your e-mail address so I can send you a better manual that shows the exact screws.