RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#31)
vassmar
RC-Monster Stock
 
vassmar's Avatar
 
Offline
Posts: 20
Join Date: Mar 2008
04.27.2008, 04:49 PM

@ lincpimp: I've been trying to keep it as basic as possible. That's the cool part hehe.
Lol yeah, maybe i should change the topic name :P We always say Ass here in Sweden hehe.

@ lutach: Oh okay coolers! I was using 3S too and it was plenty was then also. I will try to get hold on a slightly bigger pinion this week or so. Maybe my friend can make them at his work. This body was the best buy ever made lol. No but i think it's a good speed body. All the changes i've made to it have really worked out for the better too.

@ miniGranis: Didn't understand that :P

@ its me: I always get this question and all i can say that i've been more than precise with the rollout setting and that i pretty sure that i ain't getting any wheel spin too. I am very gentle with the throttle, as you may see in the videos. And all the runs i make are very consistant all the time. But sure, it's not as accurate as as radar gun.
Go for it and build it! ;)

Last edited by vassmar; 04.27.2008 at 04:51 PM.
   
Reply With Quote
Old
  (#32)
aqwut
Brushless Heavy Weight....
 
aqwut's Avatar
 
Offline
Posts: 1,954
Join Date: Sep 2005
Location: Kingsville, Ontario
04.27.2008, 08:07 PM

Vassmar, have you used a radar gun or GPS?...


The Power of BRUSHLESS!!!!!
http://www.geocities.com/aqwut
1HP (electric) = 746 Watts.
Everything is brushless!!
   
Reply With Quote
Old
  (#33)
speedracer1129
RC-Monster Carbon Fiber
 
Offline
Posts: 185
Join Date: Dec 2007
Location: Miami, FL
04.27.2008, 10:07 PM

I definately want to see a radar pass, not the Venom. If I remember correctly, there is someone else who worked on a TC4 and clocked between 105-110 on a radar, yet clocked 140+ on the Venom due to wheel spin when the car would break a little traction. I personally did 102mph Tuesday night on a 5700 running 4S. I don't like to knock down anyone, but I have been working with Castle's help on this project for a couple of months and they assured me that the motors are only good for a max of 65k!! I logged 60k with the datalogger on my setup.....
   
Reply With Quote
Old
  (#34)
speedracer1129
RC-Monster Carbon Fiber
 
Offline
Posts: 185
Join Date: Dec 2007
Location: Miami, FL
04.27.2008, 10:16 PM

http://www.youtube.com/watch?v=jbmmHafKR8Q

Here is a sample vid of my car and after comparing, both cars do not look that far off from each other. I don't see the 30mph difference?? I could be wrong.......

What do you guys think??
   
Reply With Quote
Old
  (#35)
aqwut
Brushless Heavy Weight....
 
aqwut's Avatar
 
Offline
Posts: 1,954
Join Date: Sep 2005
Location: Kingsville, Ontario
04.27.2008, 10:35 PM

I do see a bit of a difference... but that could be from da/night, different camera FPS, etc.. but a radar pass or GPS pass would be killer...


The Power of BRUSHLESS!!!!!
http://www.geocities.com/aqwut
1HP (electric) = 746 Watts.
Everything is brushless!!

Last edited by aqwut; 04.27.2008 at 10:36 PM.
   
Reply With Quote
Old
  (#36)
E-Revonut
RC-Monster RC8T
 
E-Revonut's Avatar
 
Offline
Posts: 2,554
Join Date: Jan 2008
Location: Syracuse, New York (Camillus)
04.27.2008, 10:36 PM

Speedracer, you have a fast car don't get me wrong here, I can def see a difference between yours and vassmar's car though. It may not be 100% accurate with the venom setup but I would say he's pretty close.
   
Reply With Quote
Old
  (#37)
DRIFT_BUGGY
RC-Monster Brushless
 
DRIFT_BUGGY's Avatar
 
Offline
Posts: 2,077
Join Date: May 2007
Location: Australia
04.27.2008, 10:49 PM

Nice going, don't know how people manage to handle a 1/10 car going that speed. 70mph 1/10 is fast enough let along 120mph+


Losi 8ight
MMM V1 w/1.20
Airtronics MX3 2.4Ghz
TP 5S 5000mah
Neu 2.5D/F
   
Reply With Quote
Old
  (#38)
its me
There is no help for me... I'm addicted to R/C
 
its me's Avatar
 
Offline
Posts: 291
Join Date: Sep 2006
04.28.2008, 02:53 AM

Quote:
Originally Posted by vassmar View Post
@ lincpimp: I've been trying to keep it as basic as possible. That's the cool part hehe.
Lol yeah, maybe i should change the topic name :P We always say Ass here in Sweden hehe.

@ lutach: Oh okay coolers! I was using 3S too and it was plenty was then also. I will try to get hold on a slightly bigger pinion this week or so. Maybe my friend can make them at his work. This body was the best buy ever made lol. No but i think it's a good speed body. All the changes i've made to it have really worked out for the better too.

@ miniGranis: Didn't understand that :P

@ its me: I always get this question and all i can say that i've been more than precise with the rollout setting and that i pretty sure that i ain't getting any wheel spin too. I am very gentle with the throttle, as you may see in the videos. And all the runs i make are very consistant all the time. But sure, it's not as accurate as as radar gun.
Go for it and build it! ;)
I think ill give it a try :) this whole time I was planning a HV TC4, If I can still achieve that 100+MPH speed on only 4 S then im sure my wife and my wallet will be happy!!


rccna.com
   
Reply With Quote
Old
  (#39)
vassmar
RC-Monster Stock
 
vassmar's Avatar
 
Offline
Posts: 20
Join Date: Mar 2008
04.28.2008, 03:51 AM

Quote:
Originally Posted by speedracer1129 View Post
http://www.youtube.com/watch?v=jbmmHafKR8Q

Here is a sample vid of my car and after comparing, both cars do not look that far off from each other. I don't see the 30mph difference?? I could be wrong.......

What do you guys think??
Well, apperently the 7700 do works on 4S. And honestly i think that pass looks abit like my 90-100mph passes. So i can see a difference. Now i know that the Venom speedo isn't 100% correct but, every run i've made with the car has been very consistant. I have done the same top speed around 120mph on 3 differnt days. And compared to what speed i started at 2 weeks ago i think it would be weird if i got more and more wheel spin so to speak beacsue the speed have been increasing every time due to changes i've made.So i think it's pretty close to the real speed. But i will get a radar gun, will order one today ;) Probably a Eagle Tree system too so we can see the RPM etc. too.
Any more info on your car btw? :)

Last edited by vassmar; 04.28.2008 at 03:52 AM.
   
Reply With Quote
Old
  (#40)
crazyjr
RC-Monster Dual Brushless
 
crazyjr's Avatar
 
Offline
Posts: 3,794
Join Date: May 2005
Location: georgia
04.28.2008, 06:43 AM

Vassmar, looks like between you and Mod man, there will be some competition for Nic Case. Congrats on the speed with a stocker RC


Work because i gotta, play because i wanna

People here hate Nitro, I love it. I start it, run it about 50 ft from me and it dies, I go after it. Perfect exercise
   
Reply With Quote
Old
  (#41)
aqwut
Brushless Heavy Weight....
 
aqwut's Avatar
 
Offline
Posts: 1,954
Join Date: Sep 2005
Location: Kingsville, Ontario
04.28.2008, 07:52 AM

Quote:
Originally Posted by vassmar View Post
Well, apperently the 7700 do works on 4S. And honestly i think that pass looks abit like my 90-100mph passes. So i can see a difference. Now i know that the Venom speedo isn't 100% correct but, every run i've made with the car has been very consistant. I have done the same top speed around 120mph on 3 differnt days. And compared to what speed i started at 2 weeks ago i think it would be weird if i got more and more wheel spin so to speak beacsue the speed have been increasing every time due to changes i've made.So i think it's pretty close to the real speed. But i will get a radar gun, will order one today ;) Probably a Eagle Tree system too so we can see the RPM etc. too.
Any more info on your car btw? :)
That would be awesome, and by the looks of it.. it does look like it's going that fast or close to that speed anyways.... but it still amaze me that you are able to get to those speeds with that much power.... I love the take off though, it looked pretty sweet... did you break anything...


The Power of BRUSHLESS!!!!!
http://www.geocities.com/aqwut
1HP (electric) = 746 Watts.
Everything is brushless!!
   
Reply With Quote
Old
  (#42)
vassmar
RC-Monster Stock
 
vassmar's Avatar
 
Offline
Posts: 20
Join Date: Mar 2008
04.28.2008, 02:48 PM

Quote:
Originally Posted by crazyjr View Post
Vassmar, looks like between you and Mod man, there will be some competition for Nic Case. Congrats on the speed with a stocker RC
We'll see :) I'm sure Nic will have something up his sleave for this years competition.

@ aqwut: It's a solid car so i havn't got any damage what so ever after several hard crashes, both in the woods and on the tarmac hehe.

--

FYI, the 7700 is one though little motor.. i just ran 5S tests and it's still in one peace But i only manage a top speed of 124mph becasue the spur broke on the second run.. but new update coming as soon as i've got a new spur in. Also.. i have never heard a motor revving that high just when the spur broke haha.
   
Reply With Quote
Old
  (#43)
crazyjr
RC-Monster Dual Brushless
 
crazyjr's Avatar
 
Offline
Posts: 3,794
Join Date: May 2005
Location: georgia
04.28.2008, 02:57 PM

Quote:
Originally Posted by vassmar View Post
We'll see :) I'm sure Nic will have something up his sleave for this years competition.

@ aqwut: It's a solid car so i havn't got any damage what so ever after several hard crashes, both in the woods and on the tarmac hehe.

--

FYI, the 7700 is one though little motor.. i just ran 5S tests and it's still in one peace But i only manage a top speed of 124mph becasue the spur broke on the second run.. but new update coming as soon as i've got a new spur in. Also.. i have never heard a motor revving that high just when the spur broke haha.
The Dragracing guys are running the 7700 at 5s, but thats only for 132 feet at a time


Work because i gotta, play because i wanna

People here hate Nitro, I love it. I start it, run it about 50 ft from me and it dies, I go after it. Perfect exercise
   
Reply With Quote
Old
  (#44)
vassmar
RC-Monster Stock
 
vassmar's Avatar
 
Offline
Posts: 20
Join Date: Mar 2008
04.28.2008, 03:08 PM

I've heard so too, that's why i wanted to test it for abit longer runs like this.
   
Reply With Quote
Old
  (#45)
rcmonkey
Team Thermal Racing
 
rcmonkey's Avatar
 
Offline
Posts: 74
Join Date: Feb 2008
Location: Antrim, UK
Talking 04.28.2008, 04:41 PM

5s with a MM7700 Thats insane, 142450 rpm That is so sweet


My Rides:
Tamiya Dark Impact - Team Losi Micro B - Cen Mini Madness - Soon to be BL Xray XB8 TQ
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com