MMM's are shipping

[e-mike]

if i dont have the bullet plug in the box...i tink that im gonna remove the plug on the esc and weld the wire directly on it...i want my esc....i order one from mike,,there any person here have receive it(person who order from mike)?

[MTBikerTim]

I'm going to be dead before I get my MMM. The wait is killing me . Come on people who have received them. Get pictures get them installed and get video.

Just curious though. Like Drift_Buggy my ship date says 15th of May and I also ordered some 6.5mm bullets. How many other people ordered bullets with theirs and has anyone who did get a shipped notice?

[JThiessen]

What's up with the external BEC (shown in the picture on the Traxxas site)? The information I saw led me to believe it was internal to the unit?????

[MTBikerTim]

Thats not a bec it's the castle link.

I believe that was a picture of the castle link not a bec.

[phatmonk]

Freakin WOW!It shredds had my connectors on in less than 30 minutes thats a record for me. Its very smooth and the fan realy pushes some air.

[lutach]

Originally Posted by phatmonk

Freakin WOW!It shredds had my connectors on in less than 30 minutes thats a record for me. Its very smooth and the fan realy pushes some air.

Some video would do us well .

[hootie7159]

MINE ARRIVE TODAY BUT....I'M AT WORK FOR 48HRS ....AHHHHHHHHHH!!!!!! TOO BAD MY FIANCE DOESN'T KNOW HOW TO SOLDER B/C AT THIS POINT I'LL LET ANYONE TEST IT OUT...... .............

[lutach]

Originally Posted by hootie7159

MINE ARRIVE TODAY BUT....I'M AT WORK FOR 48HRS ....AHHHHHHHHHH!!!!!! TOO BAD MY FIANCE DOESN'T KNOW HOW TO SOLDER B/C AT THIS POINT I'LL LET ANYONE TEST IT OUT...... .............

Next day it to me . I'll add the connectors and test it out . I would love to see videos of the controller in action. Maybe a few full packs.

[ICUBoy]

Gee it's nice to see someone else works long hours hootie! Just pass the time planning the setup and pulling the imaginary trigger- really hard!

[JThiessen]

Originally Posted by MTBikerTim

Thats not a bec it's the castle link.

So there was a long black chord, which I assumed was the Castle link. THe other chord was red/black and had a green "thing" on the end with round white sticker on it, and the other end looked like it has a standard servo/reciever plug on it. It looks a lot like the external BEC I got with both my HV-Maxx's.

[skellyo]

That's the castle link. It's got a mini USB on one end and the 3 wire plug on the other to plug into the 3 wire plug on the MMM.

[FG101C]

Got mine in, very cool indeed. I have a question. What's going to be the best way to mount this to the chassis? The case is built just like the Sidewinder, the Sidewinder I have doubleside taped to the chassis of my CTR.5 popped apart twice until I ran a couple spots of CA to hold it together. I really don't want to CA the Monster. Any ideas? Thanks.

[skellyo]

You can use industrial grade velcro or better double sided tape. I use 3M double sided tape that is meant for sticking emblems on full size vehicles. If the surface is cleaned before I stick it down, it's a real PIA to get the part off.

in addition to the velcro you could use a few zip ties as insuarance, my MM I have in my Rustler comes unfastened a little