RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Castle Creations

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old
  (#11)
sikeston34m
RC-Monster Brushless
 
sikeston34m's Avatar
 
Offline
Posts: 2,085
Join Date: Sep 2007
05.13.2008, 07:52 AM

This is BS.

The Quality of the Battery affects how much power the ESC is able to feed the motor. That's all.

The firmware of the ESC knows what to do with voltage drops. That's the job of the LVC function.

I aggree with the NIMH use statement.

Let's say the Lipo packs are only capable of giving up 40 amps Max. Let's say these are Generic and way over rated.

But let's put this and the MMM with a very big motor and gear the setup for 100mph.

A setup like this would overload the amp capability of the batteries.

The ESC would not run the motor the way it should perform because it would be on the lvc all the time.

Heat is a tattle tale sign of what component is being pushed too hard.

The Packs would quickly get hot and probably puff some cells, if not all the cells.

The ESC doesn't care what batteries are used, as long as the voltage is within specs. The ESC is going to deliver whatever amperage is available for it to work with.
   
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com