I've been Slashed!

[lincpimp]

Too cool, looks like those truck run well on the track. I am guessing that they were using the stock gear for those runs.

I would like to get one, and run 3s a123 in it, any ideas if the stock esc could handle that? It is rated for 8.4v (7 cell nimh) and the a123s will drop voltage a bit.

[skellyo]

Originally Posted by lincpimp

I would like to get one, and run 3s a123 in it, any ideas if the stock esc could handle that? It is rated for 8.4v (7 cell nimh) and the a123s will drop voltage a bit.

At the end of the video I linked, the black truck was running a 3S A123 pack in it on the stock electronics.

[Matthew_Armeni]

I've already ran the stock ESC on 3s lipo with the stock motor, it ran fine, no problems. It says it can do 8 cell NIMH so 3s A123 should be no problem.