NJ/NY/PA/CT Drivers - Bash at the Barn 8th of June

[Finnster]

Holy frigs it was hot, but really fun. Its too bad only 2 crt.5s were there. It was a pretty rough track for the little guys, but it drove really well. It was my 1st time on a track w/ it, and I was pretty happy with it. I miss the LMT as the 12s did not quite have the punch to double the whoops section, but handled really well.

I had lots of bad luck w/ my revo. Slipper pads grenaded and took out 2nd gear (or vice versa god knows.) Only got 1 lap in the 1st qual, still down for repairs during the 2nd qual. Got it running in the main and was driving well. I can't keep up w/ Mike and the truggs, but seemed on par w/ a nitro revo that was running in another class. Then the batt had a problem 7 min into the main. I swapped batts, but only 20secs were left in the race...so....


Too bad a couple other guys didn't make it. I was hoping for more .5s. A class of 5 or so would be great. Mike said he'd bring his next time, and Cem gates should get his up again I would think. Fun little cars to drive, just stay out of the big truggs way during practice. A nitro slammed into mine (recklessly) and broke the servo saver. Thankfully Arct1k saved me w/ a spare so I had one truck running well. :)

I brought a cam, but didn't get it out. Only 2 crts seemed a bit silly to vid, and too much chaos for the other event. Maybe next time

Hey Guys! I had alot of fun today! Yes, I have video that I'll post later this week.

I was lucky enough to finish all the quals and the main. I finished second next to Mike who got first. My mmm's fan took a dump at the end of the main and a motor wire seems to be real lose on the board(starting to fray, someone didn/t tin it enough or at all). Other than that, I finished in one piece!

A big thanks to Mike who helped me alot with my mmm programing! It made my truggy drive and jump so much better! Now I just need more time at the track....

Bye