Castle - Make A Special Edition Monster

[bdebde]

Originally Posted by Pdelcast

Well,

Probably around $275.00 for the 60 FET option in 8S and 12S versions. Around $375.00 for the 120 FET version (40V-8S or 60V-12S.)

8S - 60FET will handle in the 200A range (continuous) and 1000A (surge)
12S - 60FET will handle in the 125A range (continuous) and 500A (surge)

8S - 120FET will handle in the 325A range (continuous) and 2000A (surge)
12S - 120FET will handle in the 200A range (continuous) and 1000A (surge)

Most likely we will release the 12S version first (stock FETs) -- followed by the 8S version.

Sound OK?

Now that's what I'm talkin 'bout

[lutach]

Originally Posted by bdebde

Now that's what I'm talkin 'bout

Exactly. Europe will be playing catch up when those bad boys come out .

[johnrobholmes]

Playing catch up? They won't be able to catch up. Castle already pushed Quark out of the market. The SSB never even made it to the states. Unfortunately that means that Castle only has competition from hobbywing importers and novak right now, but that doesn't mean they are gonna be slacking.


I am patiently awaiting something with a sensor still, I friggin hate brushed motors but crawlers pretty much need them for a good speed range right now.

[tc3_racer_001]

http://videoserver.rcuniverse.com/rc...994/castle.wmv

dunno how old this is, but THATS CRAZY!

i assume this is something what you mentioned above... 22500W 30HP, working on a motor... thats one friggin HUGE motor. nice

I'll take 2 for the pre-order. High Voltage rules the roost.

[Pdelcast]

Originally Posted by tc3_racer_001

http://videoserver.rcuniverse.com/rc...994/castle.wmv

dunno how old this is, but THATS CRAZY!

i assume this is something what you mentioned above... 22500W 30HP, working on a motor... thats one friggin HUGE motor. nice

http://www.castlecreations.com/csp/index.html

We do some pretty high power stuff. :)

[lutach]

Originally Posted by Pdelcast

http://www.castlecreations.com/csp/index.html

We do some pretty high power stuff. :)

Can you have the SHV with the car software Patrick?

[Pdelcast]

Originally Posted by lutach

Can you have the SHV with the car software Patrick?

No, it has different back-emf hardware -- not sensitive enough for the car software. No worries though, the 12S hardware for the car controllers should be done this weekend. I'll probably be prototyping in about 3-4 weeks.

[VintageMA]

Originally Posted by Pdelcast

http://www.castlecreations.com/csp/index.html

We do some pretty high power stuff. :)

That is some seriously cool stuff!!

Would it be possible to make these controllers available with the CIL software - there are some powerful options available in there that the consumer CC Link software just can't provide.