Who wants to trade??.

[TDC57]

I'm offering up a used 2008 Nue 1515 3D s (run on 6s for the past 3 months) I still have the receipt from Mike . Nothing at all wrong with it!, 30 day swap guarantee!! It has 6.5 bullets and the rear lid cover.

I'm looking / needing an equally good running MGM controller 5s capability and or higher please.


Too further sweeten the deal!
I’ll even through in a harden pinion gear 22 – 25 you pick a gear.. (one only).

Thanks for your time gentlemen.

Have a great day.

Shaun.

[lutach]

Originally Posted by TDC57

I'm offering up a used 2008 Nue 1515 3D s (run on 6s for the past 3 months) I still have the receipt from Mike . Nothing at all wrong with it!, 30 day swap guarantee!! It has 6.5 bullets and the rear lid cover.

I'm looking / needing an equally good running MGM controller 5s capability and or higher please.


Too further sweeten the deal!
I’ll even through in a harden pinion gear 22 – 25 you pick a gear.. (one only).

Thanks for your time gentlemen.

Have a great day.

Shaun.

I would love to go with this offer, but my MGM 16016-3s has to be sent back to MGM to get a new BEC as it stopped working when I forgot to unplug the red wire. I'm really looking for a Smooth Neu to run on 6 or even 8S with the new controllers I should be getting for testing. If you up for it, let me know and I'll even send you extra cash for you to ship it back to MGM.

[TDC57]

Good morning Lutach,
Thanks for the offer but I'm really trying to get my hands on a working MGM, (question) can I simply remove the BEC wire and install an external CC 10amp BEC and then get yours working? Or it’s dead in the water until it goes back in for repair?.

I might just be up to buying it off you if you’re interested in selling it though… I’ll pm you with an offer..

Thanks for your time Lutach..

Shaun.

[TDC57]

Will also trade for the following Neu motors

1509 1.5Ys
1509 2.5Ds

1512 2.5Ds
1512 1.5Ys

Please note that if you motor does not come with the rear cover, then I'm keeping mine..

[BrianG]

How about a Quark125 with the internal mod done? It's missing the power-side end piece though...

[TDC57]

Hay Brian,

Thanks for the offer, but I just don’t do Quark's. I'm a MGM man myself..

Thank you for your time and have a great day.

Shaun.

I have a 16018, but like Lutach, mine does not have working BEC. It does however run fine if you attach an RX pack or external BEC. I would be very interested in the trade, only without the MGM I would not have an ESC suited to run a NEU. Hrmm. A pickle....

J.

[TDC57]

PM sent "J".