Project OverKill (hehe)

my latest thought is that I will upgrade my Rc18, here is a list

ESC Mamba Micro Pro
Battery FP 25 evo 4s 1500
Hyperion y-22 4400 long can or Neu 1105/2y

I am thinking about the diffs they are the weak point in the RC18s

Originally Posted by azjc

my latest thought is that I will upgrade my Rc18, here is a list

ESC Mamba Micro Pro
Battery FP 25 evo 4s 1500
Hyperion y-22 4400 long can or Neu 1105/2y

I am thinking about the diffs they are the weak point in the RC18s

for the diffs just use mip super diffs, delrin gears, 3 shims on the diff, and one shim on the gear coming off the shaft (i used a washer that goes behind the wheel pin) when u drive it slow its fells really tight but once you get up to speed it opens up and is pefect. i have not strpied a diff yet.

here is my setup

mm esc
8000 kv mamba motor
2 x 2cell 900mah 12c for a total of 1800mah 24c

Originally Posted by drkros3

for the diffs just use mip super diffs, delrin gears, 3 shims on the diff, and one shim on the gear coming off the shaft (i used a washer that goes behind the wheel pin) when u drive it slow its fells really tight but once you get up to speed it opens up and is pefect. i have not strpied a diff yet.

here is my setup

mm esc
8000 kv mamba motor
2 x 2cell 900mah 12c for a total of 1800mah 24c

That's still only a 12c battery. The C rating doesn't change if you parallel the batteries or series them. So you actually have a 12c 1800mah pack, not a 24c. Even at 12c, the 1800mah pack still pumps out about 21 amps continuous, so not like it's lacking.

[/end nitpick]

Originally Posted by drkros3

for the diffs just use mip super diffs, delrin gears, 3 shims on the diff, and one shim on the gear coming off the shaft (i used a washer that goes behind the wheel pin) when u drive it slow its fells really tight but once you get up to speed it opens up and is pefect. i have not strpied a diff yet.

here is my setup

mm esc
8000 kv mamba motor
2 x 2cell 900mah 12c for a total of 1800mah 24c

I have the MIP super diffs but only the stock plastic gears...do you have a link for the delrin gears?