HV motor question - RC-Monster Forums

NovakTwo · 09.11.2008, 04:59 PM

Quote:

Originally Posted by lutach

As soon as the motor(s) come in, I'll start the runs. I've been testing with a 4.5R and with 35/69 gearing in my TC3 it went only 65mph in a short test. The 200A ESC is on the way and it should be fine with the 2 winds mentioned. If that ESC isn't enough I'll just find a way to strap the big dog Schulze 40.160 and let it all out. I can place the order right now for a 1.5T and a 2.5T, but they must have kevlar wrapped rotor (Or any other high strength fiber such as Spectra) and the strongest magnets on them as well.

Have someone who handles the orders contact me via e-mail and I'll either call or e-mail the appropriate info for them to get this done as soon as possible. I'm really serious about this and if there's anything Bob or anyone else would suggest for the motor before they get built, let us know.

Regards.

Hi Lutach....I have forwarded your comment to Bob and Steve.

I think you missed a couple of my posts above:

We will only wind a 2.5T HV Pro motor

We will not wrap it with Kevlar/epoxy, but the magnetic material in the HV rotor is our highest temp magnet and it is the only rotor we (have) use in the HV motors.

When do you plan to run this and where?

lutach · 09.11.2008, 05:10 PM

Quote:

Originally Posted by NovakTwo

Hi Lutach....I have forwarded your comment to Bob and Steve.

I think you missed a couple of my posts above:

We will only wind a 2.5T HV Pro motor

We will not wrap it with Kevlar/epoxy, but the magnetic material in the HV rotor is our highest temp magnet and it is the only rotor we (have) use in the HV motors.

When do you plan to run this and where?

I just answered Bob. I know you mentioned the only one made will be be the 2.5T, but see if the 1.5T can get done as well. So your rotor assembly without the Kevlar wrap can handle high RPMs? I'm only asking about the Kevlar wrapping, because my 4.5R has a Kevlar wrapped rotor. As soon as I have the motor(s) are here I will start running and the location I go to is brand new paved road and it's wide and very long. Here is one of the videos I made there: http://www.youtube.com/watch?v=ZaquBD-lr6E.

NovakTwo · 09.11.2008, 05:17 PM

Bob said that will do the kevlar wrap.

lutach · 09.11.2008, 05:31 PM

Quote:

Originally Posted by NovakTwo

Bob said that will do the kevlar wrap.

Thank you. What about the 1.5T. I can't get over having one as well and I won't be sleeping too good if it doesn't get done. If you don't have the magnet wire in stock that's needed, I'll be more then happy to get it.