 |
|
|
|
|
|
 |
|
|
 |
 |
|
 |
|
(#1)
|
|
RC-Monster Brushless
Offline
Posts: 2,077
Join Date: May 2007
Location: Australia
|
09.19.2008, 03:19 PM
Would one of these work?
http://www.jaycar.com.au/productView...Max=&SUBCATID= MMM V1 w/1.20 Airtronics MX3 2.4Ghz TP 5S 5000mah Neu 2.5D/F |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
|
Guest
Posts: n/a
|
09.19.2008, 05:10 PM
Quote:
I posted a link which i can't find for you  Get the 35v cap from Jaycar , they only come in 1000uf so buy two and run them in parallel for 2000uf , make sure it's the low esr radial cap when you ask  Mounting a fan , just bend a piece of thin alloy 90o .Place the esc on it and then face the bent bit towards the solder posts , mount the fan to this and you will have it blowing at the solder posts . You can make the bottom part of the alloy a bit wider and drill some mounting hole in it while having the esc attached to the alloy some how , maybe double sided tape and a zip tie for security . |
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
