MMM v3?

[killjoyken]

Originally Posted by pullinteef

I think if you switch the CCBEC plug from the bat/bind slot to the aux slot it might fix the problem with having to re-bind. it did for me, and is listed on castle's CCBEC page.

I can't. I'm using mechanical brakes and have to use the aux slot for my brake servo. I think I'm just going to ditch the CCBEC for a receiver pack, and I hate receiver packs! It's either that or order the SportBEC from Mike. I love how you can plug the esc into the bec!

[Arct1k]

If you have set the voltage on the BEC you can just "remove" the orange wire on the bec lead - It is this what causes the issue (IIRC the signal wire looks like ground on startup and hence the rx thinks it needs to rebind) OR CC IIRC will swap the bec for a newer model which doesn't have this issue OR you can use a Y adapter on one of the other channels.

Originally Posted by Pdelcast

Who are you trying to contact? (and what email address are you using?)

Thanx!

Hi !

My e mail : cbracingmodelisme@gmail.com

I just want to place an order for some products : MMM and Neu motors ...

I resend my e mail to all the adresses I found on your website.

[suicideneil]

Huh?

You dont need to contact Castle via any special channels to place an order- go to their website, and order your motor from this page:

http://www.castlecreations.com/produ...motors/nm.html

They arent selling any MMMs at the moment since they are being re-worked, but you can still buy the V2 model from Rc-monster or a few other places, like ImpaktRc and Amainhobbies etc.

[Arct1k]

I think he's a local french dealer - so is after dealer prices...

Yes I'm a reseller but it seems difficult to work with C/C :(, I can easily understand they are very busy at this moment.

[Arct1k]

I would do like Mike does and work through a volume distributer...

[suicideneil]

Ah, fair-dos.

[E-fanatic]

Any chance that the new combos will be out this month? I see all the webstores say mid Oct??? Will the v3 be done in time? I cant wait but have no choice.

I would say it'd be highly unlikely that the combos willbe out by Mid Oct. As far as I know, the V3 is still getting worked on and will ship in about 2 weeks. 2 weeks = Mid Oct!

Also, we havnt received any word on the Castle Neus... Im thinking they are dedicating more man hours towards fixing the MMM's than the motors :D

This is all speculation.... who knows. They might start shipping before Mid Oct!

Ive got my combo on pre-order so hopefully when they're released Ill be one of the first to get one shipped out to me!

History tells us that they wont ship until Dec. Just my opinion.

[E-fanatic]

Originally Posted by e-mikey

History tells us that they wont ship until Dec. Just my opinion.

NICE

My V1 is still running fine with a small fan mod and case mod. I would really like to see the V3 roll out soon.
it will really help open up 1/8th electric when there is a plug and play ESC and motor combo.

Hello,
Castle creations still don't reply to my e mails, I sent to all the e mails I could find on their website... is there any other adress?
Thanks.

[Sower]

Originally Posted by Christophe

Hello,
Castle creations still don't reply to my e mails, I sent to all the e mails I could find on their website... is there any other adress?
Thanks.

Hey Christophe . . . are you sure you are ok to post a link to your store selling brushless stuff? I realize it's not in the U.S., but I still thought that wasn't allowed on this site as it takes potential business away from Mike. Not trying to bash or anything, just an observation.