4s vs 5s on Neu 1512 1.5D and 1515 1.5D?

[e-mike]

Originally Posted by Ryu James

no troubles with your motor huh?

no never had issue!!!!

[BL_RV0]

Here's stum's video of his revo with a 1515 1.5D on 6s:
http://www.youtube.com/watch?v=85v85Pn3DMk

[Ryu James]

nice! damn! that is sick! i have seen that video before actually in my endless hours on the web looking at RC stuff. but thanks for posting that. i just posted some pics of my truggy build. should finish thursday night and i will post a video.

hey rye james ,lookin forward to the buggy,this is joe,i posted this video of my erevo runnin 6s on a nue 15151 1y ,on two 3s 5000hv 11.1v maxamps,i gps'd it a little bit ago almost wide open at 59mph its a screamer,....ill be in touch,.....http://www.youtube.com/watch?v=i39BByzKjuI

[Ryu James]

Originally Posted by erevo15151y

hey rye james ,lookin forward to the buggy,this is joe,i posted this video of my erevo runnin 6s on a nue 15151 1y ,on two 3s 5000hv 11.1v maxamps,i gps'd it a little bit ago almost wide open at 59mph its a screamer,....ill be in touch,.....http://www.youtube.com/watch?v=i39BByzKjuI

hey joe,
hope you enjoy! tear up a golf course when you get a chance.

Ryu

hmmmm odd.....what gearing was he running.....thats the same motor i had in me erevo on 6s zippy geared 24/58 with my brand new first run v3 and my v3 died.....most everyone here told me my setup was too agressive including castle

be carefull james

??????,, bought your motor from who?????? stock gearing

[Ryu James]

Originally Posted by bustitup

hmmmm odd.....what gearing was he running.....thats the same motor i had in me erevo on 6s zippy geared 24/58 with my brand new first run v3 and my v3 died.....most everyone here told me my setup was too agressive including castle

be carefull james

hmm, yeah. i never did put my 1515 1.5D on 6s or my 1512 1.5D on 5s. the 1515 1.5D on 5s does near 70mph in my truggy geared 15t/48t. it is insane. at 50mph it will wheely. my 1512 on 4s was fast too but not as fast. prob in the 60mph range. you probably were too aggressive. but i would be worried about the motor more than the esc. the 1515 1.5d on 6s is at about 62k rpm and the max on Neu is supposed to be 60k. i know there are guys that push the limit but i try to keep mine at 55k rpm or less. try the 1.5d on 5s. you wont be disappointed.