9l in crt .5?

[magman]

Originally Posted by david lamontagn

My crt.5 will have my Neu 1512, 1.5d/s on 4s, with proline bowtie 30 serie.
SHould be nice setup for bashing

A 1512 on 4s in a crt.5...look out!

i'am crazy, i know it, but i like to have more than not enough

[Snipin_Willy]

I already posted on your thread but a 1509 will keep the front wheels off the ground running 2.2 gladiators. 1512 should be a bit snappy!

[MetalMan]

The 9L on 3s is a great motor in a CRT.5, especially with an 18t pinion and 2.2 truck tires. My MM and motor never exceeded 150 deg. F in that truck, despite the 45mph top speed. Can you say power!

i ran a 9L (thanks BrianG for the suggestion) in my crt.5 with 30 series proline bowties and 14/46 , ran @ 135* and had plenty of power

3s

to bad i sold it , it is a very fun truck

Originally Posted by entjoles

i ran a 9L (thanks BrianG for the suggestion) in my crt.5 with 30 series proline bowties and 14/16 , ran @ 135* and had plenty of power


to bad i sold it , it is a very fun truck

14/16?...did you mean 14/46?

Originally Posted by bustitup

14/16?...did you mean 14/46?

Probably, he

yeah 14/46


i think i should go back to bed

Originally Posted by entjoles

yeah 14/46


i think i should go back to bed

any pictures of this rig?...crt .5 with 30 series

those 30's look awesome.....what hex and what mount are they?...would I need adaptors?

If i,am right, the crt.5 stock hex is 12mm, same as Traxxas rustler, and i suppose that entjoles have use the proline nitro rustler rear wheel at four corner
No i just take a close look at the pics and entjoles use the proline traxxas adapter for nitro rustler and universal wabash 30 serie proline wheel......

THis one:
http://www3.towerhobbies.com/cgi-bin...?&I=LXMUG0&P=7
But entjoles correct me if i am wrong, but you need two set of this adaptor because you need 4 rear one and the kit comes with 2 front and 2 rear, right?

And this wheel:
http://www3.towerhobbies.com/cgi-bin...?&I=LXMUF7&P=7

Originally Posted by david lamontagn

If i,am right, the crt.5 stock hex is 12mm, same as Traxxas rustler, and i suppose that entjoles have use the proline nitro rustler rear wheel at four corner
No i just take a close look at the pics and entjoles use the proline traxxas adapter for nitro rustler and universal wabash 30 serie proline wheel......

THis one:
http://www3.towerhobbies.com/cgi-bin...?&I=LXMUG0&P=7
But entjoles correct me if i am wrong, but you need two set of this adaptor because you need 4 rear one and the kit comes with 2 front and 2 rear, right?

And this wheel:
http://www3.towerhobbies.com/cgi-bin...?&I=LXMUF7&P=7

yup

I will put exactly this setup on my crt.5. But i don,t have the RCM extended one, but i,ve the new crt.5 pro with the extended chassis, but i think that this chassis is shorter than the RCM one. Hope that this 30 serie wheel will not look too bad on it