 |
|
|
|
|
|
 |
 |
capacitor to MGM16018. |
 |
|
 |
|
(#1)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 71
Join Date: Jan 2008
Location: japan
|
capacitor to MGM16018. -
11.07.2008, 07:52 AM
I want to add capacitor to MGM16018.
What do you do? I ask for good advice. MGM 16018 3s×2p 6s 5200 xt8 1515 2200KV 12/48T MGM 16018 9s a123 or 8s 4000 MUGGY 1521 1900KV 11/46T Is low esr capacitors a value of how much? Are you usable to MGM 16018? 1,500μF 105℃ 0.014ΩMAX. 35v |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Dual Brushless
Offline
Posts: 5,061
Join Date: Oct 2007
Location: Thousand Oaks CA
|
11.07.2008, 09:49 AM
Question about your signature- you said you run a 16018 on 8s lipo. The 16018 has problems with 6s and runs comfortably on 5s. Are you sure you're not mistyping something?
|
   |
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
KillaHurtz
Offline
Posts: 2,958
Join Date: Apr 2006
Location: Bucks Co, PA
|
11.07.2008, 12:17 PM
That's too many volts for the 16018. You need a 9032 or a 16024 to run that high of voltage.
I don't know how much value putting more caps on would be. They are already quite large and the esc runs well, at least my 9032 does upto 10S. |
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
That's All Folks!
Offline
Posts: 2,359
Join Date: Dec 2006
Location: in a VAN down by the RIVER
|
11.07.2008, 04:15 PM
The MGM's only need additional caps if running very long battery wires. But as the others said a 16018 will not do 8s (6s max).
|
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 71
Join Date: Jan 2008
Location: japan
|
11.07.2008, 06:12 PM
sory! sory!
mistyping^^ MGM 16024 9s a123 or 8s 4000 MUGGY 1521 1900KV 11/46T 16024 9s a123 very nice my xt8 I do not want to lower the pinion more than this. I want to lower the temperature of some ESC. There are two fans. Motor and ESC are expensive! It is already 16018× 2. 16024× 1. I stand. I bought TEKNO v3 RC8 1515 2.5. I am not more than enough a fund. 13/48T 70℃ by this run. MGM USB+ PC max temp 13/48T now12/48T 60℃ over Is not there a good method to lower temperature? I have not used CAP. I think whether some temperature are lowered and demand advice from all of you. |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
RC-Monster Aluminum
Offline
Posts: 764
Join Date: Apr 2008
Location: canada, quebec
|
11.07.2008, 06:35 PM
cut your front window....maybe could be helpfull
|
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
Italian Brushless Style
Offline
Posts: 27
Join Date: Aug 2008
|
11.07.2008, 06:36 PM
this is very good notice... if the mgm 16025 run with 8s A123 is really the definitive esc......
you run in configuration 1p or 2p???? ware is the autonomy??? |
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 71
Join Date: Jan 2008
Location: japan
|
11.07.2008, 06:52 PM
I have tested it in a123 4s2p.
EOS0610iDUO90% charge. When the voltage of A123 falls, I am usable in 8s. However, 16018 A123 is until 7s. I think that I am broken as run possibility immediately. Because I am heavy, A123 does not stimulate 2p. VID 1p. now xt8 3s2p 5200 lipo. 12/48T 1515 2200KV Only window 1/3 open now. I open it fully. try try try In the case of 16018. Does not the capacitor addition come for chilling effect expectation? |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
