Newbie needs help with brushless e revo setup

[JThiessen]

Originally Posted by E-Revonut

On 4s Your best bet would def be the MMM combo with the 2200kv 1515 1y motor. If your in a hurry and don't want to wait for the combo to come out get a Tekno Neu 1515 1y and a MMM.

X2....do not get the 2.5D to run on 4S. For 4S, you need to stay in the upper 2XXX KV range.

[E-Revonut]

Originally Posted by JThiessen

X2....do not get the 2.5D to run on 4S. For 4S, you need to stay in the upper 2XXX KV range.

Actually the 2.5d isn't that bad on 4s. I ran mine on 4s for a couple months before stepping up the voltage. It doesn't have crazy amounts of power but will gear up to run close to 40MPH as long as you have good batteries. I raced at the bash with the 2.5d on 4s. I wasn't that far off from everyone else's pace. Plenty of power to clear the triple, just lacked a little top end on the long front stretch.

[hk3948]

so why 1515 over the 1512 for the e revo. lots of people seem to have success with the 1512 in e revo.
and which 1515 would you guys recommend. if i were to get the 1y, what kind of speeds could i expect on 4s?