Mmm Initial Settings

Ok guys i'm finally done with my CRT x2 conversion...i'm about to program my esc for the first time...what initial ballpark settings should i program the esc at ??
specs are ...CRT X2TRUGGY
1515 2.5D
MMM
5S 5000 NEU ENERGY LIPO
MY STARTING GEARING WILL BE 46/15
USING DX3R RADIO GEAR
THANKS GUYS FOR ANY HELP OR ADVICE AS THIS IS MY FIRST BRUSHLESS WITH LIPO CONVERSION

[MetalMan]

This is what I would do:

-low timing
-20% punch control
-16.5v custom cutoff voltage
-60% brake
-medium start power

Thanks MetalMan for the help