Question about V3 - RC-Monster Forums

DwightSchrute · **Question about V3 -** 11.03.2008, 01:56 PM

i was at my lhs today, and they had a monster mamba there. i know they hadn't had any since Castle halted production awhile back, but the guy there said Castle sent it to them last week. I asked him what version it was, and without hesitation he opened it and there was the piece of paper that said it was a V2.

so my question is, did your new escs have a v3 documentation like the v2 did? i'm wondering how they got a V2 if castle had halted production way before he got it.

any help is greatly appreciated.

11.03.2008, 02:30 PM

If he got it last week, there is no way it should be a V2. Its possible he could have got it from his distributor who might have had some V2's. We havent shipped any V2's for a long time now. Not since we halted production on them.

JaySki · 11.03.2008, 02:43 PM

regardless, you should be able to send it to Castle and they will swap it for a V3.

DwightSchrute · 11.03.2008, 03:14 PM

thanks for the info, much appreciated.

DRIFT_BUGGY · 11.03.2008, 04:48 PM

On the box there is a sticker saying V3, Motor Only

himalaya · 12.03.2008, 01:54 AM

I placed an order at Tower on Nov.28, Yesterday I got it and it's a V2 !!
That doesn't make sense.

Should I send it in for replacement now or wait until it dies ?

DwightSchrute · 12.03.2008, 09:09 AM

Quote:

Originally Posted by himalaya

I placed an order at Tower on Nov.28, Yesterday I got it and it's a V2 !!
That doesn't make sense.

Should I send it in for replacement now or wait until it dies ?

wow, that's kinda disturbing...i might be inclined to send it back after seeing some pics of peoples v2 issues.

i would have thought tower would have been one of the first people to get the v3's.

i'm wondering if it might have been overstock or something they found in the warehouse and they just sent it out.

skellyo · 12.03.2008, 09:20 AM

Quote:

Originally Posted by himalaya

I placed an order at Tower on Nov.28, Yesterday I got it and it's a V2 !!
That doesn't make sense.

Should I send it in for replacement now or wait until it dies ?

I would have thought they would be out of the V2's. They had a long lag between stock on there. One would think that when they came back in stock a couple of weeks back, it would have been only V3's.

himalaya · 12.04.2008, 11:12 PM

Quote:

Originally Posted by skellyo

I would have thought they would be out of the V2's. They had a long lag between stock on there. One would think that when they came back in stock a couple of weeks back, it would have been only V3's.

That's exactly what I thought and why I placed the order.
I've had a V2 Died Brand New, This time a V2 AGAIN!!

LightningTC · 12.05.2008, 01:46 AM

Just flash your v2 to the latest firmware. I had one v2 that wouldnt flash doa out of the box. Castle sent me a brand new V3 for it. I bought another v2 and it flashed just fine.
I have ran this flashed v2 hard and it works perfect. For now my brand new v3 is just setting in the box. Waiting for another project of mine.

RBMike · 04:19 PM

Quote:

Originally Posted by himalaya

That's exactly what I thought and why I placed the order.
I've had a V2 Died Brand New, This time a V2 AGAIN!!

How do you know it's a V2? The paper in the box explaning that the fan works only when above 150 that came in all of my V3's said V2 on it but the sticker sealing the box closed said V3. Mine are all V3's. I really doubt Tower sent out a V2 at this point when they were out of stock for so long after Castle had stopped building V2's. If it really is a V2 then just update the software & run it, but call Castle & tell them & they will send you a V3 case (which will help save your fan & the components on the bottom of the board).

12.05.2008, 04:33 PM

When we first started sending out V3's the paper explaining about the how the fan works still said V2. This has been corrected, the paper now says V3. There may still be some out there that say V2 though. The box itself should say V3. We havent sent any V2's out to any distributors in a long time, so unless they were just sitting on some you should get a V3 when you buy a new one.

himalaya · 12.06.2008, 01:37 PM

Felt like I am the luckiest man in the world.
The box seal label says:"ESC ONLY no motor included 010-0062-00".
The small paper inside says this is a Mamba Monster V2
AND,
The brain board is GREEN instead of blue, with a round label saying May 08, and has NO TVS component beside the coil.
........
When I got my battery plugged, Wooow, electric ARC right in front of my eyes, I pull them apart immediately and there were hot red metal balls spread over my truck and desk, and my Deans male connector has only half length left and looks dark....... The heatsink story is absolutely true!
........
Any way, after replacing the Deans and heat tubing the battery bullet, I updated the firmware to 1.20 and tried it today for a pack, seems worked fine. But base on my experience of my first V2 which just fried itself BRAND NEW, I can hardly stop worrying......

brushlessboy16 · 12.06.2008, 01:57 PM

I have my v3, the heatsink has worn through the heatshrink on my bullets
2 of the 5
and they are rubbing the heatsink.. i have put 10 packs through it and no problems whatso ever...

ncalenda · 12.07.2008, 09:57 PM

anyone know if A main Hobbies has the v3? I don't want to order now and get V2.