Anyone looking for a Neu 1521?

[lutach]

Originally Posted by _paralyzed_

I want to put it on pletty's chassis slammed low on phaltlines for a speed e-maxx. His chassis is as long as a lightning with monoblock. What voltage do you reccomend?

I'm not going to recommend anything specially if you still planning on using that motor .

[_paralyzed_]

Ha. I'm gonna e-mail him and get the lowdown. Maybe an autograph to go with it.

[JThiessen]

That motor could probably propel that chair of yours up to about 30mph....you gotta work Lutach's sympathetic side to get that ESC out of him.

[Unsullied_Spy]

Originally Posted by JThiessen

That motor could probably propel that chair of yours up to about 30mph....you gotta work Lutach's sympathetic side to get that ESC out of him.

Screw 1521...drop a 2230 in that bad boy Might take some work to build a wheelie bar that take it but that would be awesome.

[_paralyzed_]

This is straight from Nic Case. 140mph. Wow!

[_paralyzed_]

[jayjay283]

I dunno if you have driven those phaltlines on an emaxx before, but they are turd handling tires that blow off the rim at 55mph. Just a warning before you blow $80 like I did

[Unsullied_Spy]

Originally Posted by jayjay283

I dunno if you have driven those phaltlines on an emaxx before, but they are turd handling tires that blow off the rim at 55mph. Just a warning before you blow $80 like I did

You're the first person I've heard of having problems with the Phaltlines. I've seen videos of them holding on at 60+ and they seemed to handle pretty well also.

[jayjay283]

In a straight line you can pull 60 if you buy them seperatly (rims and tires) and glue them yourself. They have some crap glue on them and dont handle well in turns. My opinion, but many others aswell.

[Unsullied_Spy]

Originally Posted by jayjay283

In a straight line you can pull 60 if you buy them seperatly (rims and tires) and glue them yourself. They have some crap glue on them and dont handle well in turns. My opinion, but many others aswell.

If it's a premount thing that makes sense. Very few pre-mounted tires have very good glue.

[jayjay283]

exactly , HPI bought some bad batch I guess, they look cooler than any other street tire but they just dont handle or hang on. Have to go foam if you want good sticky

[_paralyzed_]

thanks for the advice. I wanted unmounted tires so I could tape them anyway. Do you think a bead of silicone might hold them?

[JERRY2KONE]

In my opinion if you are going to go for some high speed, then you should use Axial Beadlocks and maybe even put a little bit of glue on them anyway just to make sure that nothing has the chance to come loose. if it does let go it will have to be because the tire came apart. Besides taping them Harold you will most definitely have to balance them if you expect top performance from your wheels at high speeds. Nice hookup on purchasing that 1521 so cheap. I think it will work out pretty well with Pletty's new chassis when he begins to deliver them. I am on that list as well, and cannot wait. I am thinking of purchasing one of the 1527's as well for testing. I think this is going to be a good year Harold. We are going to have some fun.

Originally Posted by _paralyzed_

thanks for the advice. I wanted unmounted tires so I could tape them anyway. Do you think a bead of silicone might hold them?

[_paralyzed_]

Yes we will Jerry, yes we will. I GOT THE MOTOR JUST NOW!!!! I paid 47 hrs ago and it's sitting here in front of me. It's purrrrrrty. Anyone wanna race?

[bruce750i]

Purrrrrty Fried. Just kidding. Nice grab!