MMM + 2650 combo vs MMM + medusa combo

[rootar]

Originally Posted by suicideneil

1) The MMM motors are NOT hand wound,they are neu-based designs; but are somewhat different inside though, so no direct comparison can be drawn.

just wanted to clear that up

[kulangflow]

Originally Posted by rootar

just wanted to clear that up

The CC/Neu motors are hand wound:
http://www.rc-monster.com/forum/show...0&postcount=28

[shaunjohnson]

thanks again guys.
i was looking at running rhino-zippy lipo's.
4900mah
http://www.hobbycity.com/hobbycity/s...idProduct=7299
was planning to run them in parrelel to get 9800mah (i think they are 5000mah cells though but u cant use the last few mah anyway otherwie the voltage drops too low)

so that gives me 196A continuous.
i know it cant draw this much before something goes poof so i should be right with that setup?
and i also get HUGE long runtime to boot
and i was also thinking that i could pissibly run them as a single pack to keep weight down in the 5 min heats.
will this setup (MMM + medusa 2200kv 80mm, revo 3.3 w/ stock shifting tranny) run on a mere 98A continuous?
the nitro guys already took a look at my rustler in hte 1 hour mains (i was racing it in hte 1/8th MT class as that's the only way it can fit in lol)

and the looks on their faces were kinda like...
lets hope my setup comes together

thanks again guys,
shaun