RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Castle Creations

Reply
 
Thread Tools Rating: Thread Rating: 2 votes, 5.00 average. Display Modes
Old
  (#46)
suicideneil
Old Skool
 
suicideneil's Avatar
 
Offline
Posts: 7,494
Join Date: Feb 2007
Location: Devon, England
12.19.2008, 09:15 PM

Bidproduct motors = better built feigaos. They are cheaper, and use a one-piece magnet vs the segmented magnets inside feigaos, but they give pretty much the same performance and temps/efficiency.

For 6s A123 like I run (= ~5s lipo), I'd say the 1900kv option would be best or there abouts, but the 2200kv MMM motor will be more powerful and efficient for sure, just gear down a touch to compensate for the higher kv/motor rpms.
   
Reply With Quote
Old
  (#47)
Smashwings
RC-Monster Stock
 
Smashwings's Avatar
 
Offline
Posts: 20
Join Date: Sep 2008
Location: Barcelona - Spain
12.20.2008, 05:53 PM

I've come from testing my MMM COmbo 2200KV at the track (muuddy) this morning, and all I can say is flawless performance!! high torque , high speed, super low temps; geared 20/56 (38-39mph) motor didn't go over 45ºC (113ºF) weather temp about 15ºC sunny (60ºF), MMM fan didn't see fan turning on (when body out, can't say on ride). I opened the body some times, but the motor was extremely cool so I continue runing almost non-stop!

The SPC 8000mAh 12C did very nice, high punch, low temps during rides (78ºF) very high duration time, much more than the titans or Kershaw, also 5000 mAh 25C Intellect went nice until I hit aa vertical steel rod of the circuit and broke pushrod, arm and differential yoke, but before the Revo resist a hard punishment and uncountable hard roll overs flawlessly!

I could deplenish the 8000 SPC pack, I stopped before it get to 6 volts (6.20V aprox) because the car lost speed, so I couldn't test the cut off (manually set at 12v, I think to low for 4s).
This pack and a little of the 5000 Intellect (15 min) give me an d about hour and a half runtime with short breaks (so easy 50 min with 8000 pack)

Provisional instalation, no good place for the switch and double sided velcro for the MMM that worked perfect, nice cusion, and didn't move in all the crashes and rollovers, so very nice performance , maybe the "flex" and some free movement of the velcro gives nice protection.










   
Reply With Quote
Old
  (#48)
emaxxnitro
RC-Monster Carbon Fiber
 
emaxxnitro's Avatar
 
Offline
Posts: 491
Join Date: Sep 2008
Location: Kerrville Tx.
12.21.2008, 05:39 PM

nasty lol! good to hear it go's easy on those 12c packs


808E
   
Reply With Quote
Old
  (#49)
E-fanatic
Brushless only!
 
E-fanatic's Avatar
 
Offline
Posts: 312
Join Date: Sep 2008
Location: obx NC
12.21.2008, 05:59 PM

I just took a few runs on th etrue rc 8000 10c lipos with mine in the e-revo geared 20/58 with 6.3inch tires and they did very well. I was surprised how well they handled this combo. They were 128* after hitting the 12.5volt cutoff in about 30mins.(I drove the crap out of it to see how the 8000s would handle it) I bet the smc 8k 12c would do just fine
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com