Brushless LST2 conversion - This is how to do it!!!

[Arct1k]

kydex

http://www.knifekits.com/vcom/produc...oducts_id=11296

[lincpimp]

Originally Posted by Arct1k

kydex

http://www.knifekits.com/vcom/produc...oducts_id=11296

That is the stuff, but what I am using looks to be thicker than .093... It is great stuff and really easy to work with.

[rchippie]

Originally Posted by lincpimp

That is the stuff, but what I am using looks to be thicker than .093... It is great stuff and really easy to work with.

James your truck looks nice . If that is the plastic you got from me it is in the .120 -.125 range . This site below is lst's muggy's & after shock's only .

http://hdrcvideos.com/forums/index.php

[Arct1k]

It was there .125

http://www.knifekits.com/vcom/produc...oducts_id=1188

Originally Posted by lincpimp

That is the stuff, but what I am using looks to be thicker than .093... It is great stuff and really easy to work with.

[lincpimp]

Originally Posted by Arct1k

It was there .125

http://www.knifekits.com/vcom/produc...oducts_id=1188

Yup that is it, best stuff I have tried to make trays with. I even made the chassis of my crawler with it!

[rchippie]

It will cost you shipping . If you go to lst forums . The site i linked eairler someone there can tell you . I belive the guy that makes them still goes there .

[lincpimp]

Originally Posted by rchippie

It will cost you shipping . If you go to lst forums . The site i linked eairler someone there can tell you . I belive the guy that makes them still goes there .

Sounds good, do you need my addy? Let me know what shipping costs and i can paypal you funds+.

I will look thru that site more and see what i can find. I was going to redesign the lst steering myself, just waint on a chassis to "play" with... I want to run one 1/4 scale servo, cheap and powerful! Plus i would like a 1/8 scale truggy style servo saver...

[rchippie]

Originally Posted by lincpimp

Sounds good, do you need my addy? Let me know what shipping costs and i can paypal you funds+.

I will look thru that site more and see what i can find. I was going to redesign the lst steering myself, just waint on a chassis to "play" with... I want to run one 1/4 scale servo, cheap and powerful! Plus i would like a 1/8 scale truggy style servo saver...

I had the exact same idea when i had my lst2 . But i could'nt firure out a way to make it happen .

I have a pm into the owner of the lst forums asking were you can find a bac link . I'll let you know what i find out .

I will let you know when it's ready to ship. How big were the pieces i sent you last time ?.

[lincpimp]

Originally Posted by rchippie

I had the exact same idea when i had my lst2 . But i could'nt firure out a way to make it happen .

I have a pm into the owner of the lst forums asking were you can find a bac link . I'll let you know what i find out .

I will let you know when it's ready to ship. How big were the pieces i sent you last time ?.

You da man Mike!!! Thanks!

IIRC those kydex pieces must be around a 1ft square, maybe slightly smaller. I will make the steering better, just give me time.