looking for a thread

[sleebus.jones]

Originally Posted by lutach

Aveox has a nice way of calculating all of this, but I only have PDF files of it. I'll probably take a screen shot and post it here.

Cool, I'd like to check that out.

[lutach]

Originally Posted by sleebus.jones

Cool, I'd like to check that out.

I have attached the PDF file. The other one I have is bigger then what's allowed by RCM to upload. I can e-mail you the other PDF file and you'll find some interesthing data on page 5.

Please look at the 1406/4Y which has a Kv of 1500 and the 1415/1.5Y which has a Kv of 1568. You can see that the Torque Constant In OZ/AMP of the 1406/4Y is higher then the one from the much longer 1415/1.5Y.

[What's_nitro?]

Hey LT where can I get one of those F12LMR motors?????

Look at the "Most eff. current" column... "910A @ 11V"

Yes, I know it's a typo.....

[lutach]

Originally Posted by What's_nitro?

Hey LT where can I get one of those F12LMR motors?????

Look at the "Most eff. current" column... "910A @ 11V"

Yes, I know it's a typo.....

Must be a typo. Aveox is somewhat hard to find now. You can still get them used and if you're lucky like me find them new. What's even better is that you can send it to Steve Neu and get them fixed if they have any problems lol.

[sleebus.jones]

Good stuff lutach. I'll have to give you my email for the other .pdf.

[lutach]

Originally Posted by sleebus.jones

Good stuff lutach. I'll have to give you my email for the other .pdf.

I usually only follow the good things Aveox has put out. It's strange that most of the companies don't post useful data like Aveox did. From what I can tell Aveox was the founder of RC brushless (Sensored) ESCs and motors. After they came out with their products I saw sensored motors from Ikarus and Plettenberg. I also saw saw that Castle had made 2 ESCs to work with the sensored Aveox motors.