Made CRT.5 battery tray and esc, reciever mount top-plate on the mill.. PICS

Thanks. Since those pics i have countersunk the holes for the top plate so i can use tapered head screws and won't stick up past the top and get in the way of mounting the reciever flat. Also both the esc and dsm2 reciever are stuck on with servo tape now. The only thing i wish i could do is figure out how to either get the battery laying flat or more close to the center. The balance is way off to the point where i need to put some lead on the other side. Hopefully when i switch to lipo it won't be as bad. Also, what shock oil do yall use in the shocks? Highest i had laying around was 100 and its waaay too soft.