Pay-It-Forward 2009

[JERRY2KONE]

Originally Posted by Tempted

I've got some arms, hold downs, turnbuckles(might have a full set of 3906, not 3905) and probably enough tranny parts to build a spare 3906 tranny. PM me if you need any of it.

I will take whatever he does not want for the boys project builds.



I have a set of shock towers and gray 3906 bulks. Those are breakable items for sure. I'll mail this weekend.

Sure thing mkrusedc. I will take them off your hands. I will PM my address.

[Modding_out]

Originally Posted by BL_RV0

Ok guys, i have to spill some beans here..
I'm building a maxx out of PIF'd parts and then will build the maxx to the most deserving member in my opinion. Here is a list of people that have given me parts:
JayJay283 (got the parts today!!!!)
Krawlin
notnodak
Thank you guys for all, and I will be sure that this maxx goes to the most deserving member, once the truck is finished and rtr, a poll will be posted here.
Here is a list of what i need to complete:
tranny
servos
tx/rx
motors
batteries
a-arms
knuckles
1 diff
shock towers
screws
battery hold downs
turnbuckles

If I think of any more, i will post here.

Hey, BL_RVO. I was going to pif some titans from sjcrss, but I told him you need them more than me.

It's the best I have ''offer'' to the build, you and Jerry snatched up all the maxx parts before I even saw them. LOL

[_paralyzed_]

Originally Posted by Metallover

Pedeboi said he'd send me some 12mm hexes for a few weeks now. I've seen nothing of them. If anyone has an extra pair of 12mm hexes, pm me.

pm sent, shiny aluminum ones for you!

[pedeboi364]

sry metal, i've only found 1. if u want u can have my alum ones too, ill get some others soon

[BL_RV0]

Originally Posted by Tempted

I've got some arms, hold downs, turnbuckles(might have a full set of 3906, not 3905) and probably enough tranny parts to build a spare 3906 tranny. PM me if you need any of it.

I will take it all!
Shoot me a pm if you need my PP address.
Thanks!

[Metallover]

Originally Posted by pedeboi364

sry metal, i've only found 1. if u want u can have my alum ones too, ill get some others soon

No Thanks. Harold's got me covered. I don't need any more than that.. Thanks though.

[JERRY2KONE]

I just wanted to share something with eveyone that Pedeboi is making good on things. Look I don't think he wanted to make things bad for anyone. It was just a young mistake, and now he has offered to send the tranny back to me. Of course I really do not need it, but I just found out about someone who really wants and needs it and has for a very long time. So he will send it to Paralyzed for one of his projects as his "Pay It Forward" gesture, and making good on his mistake. All is good in the RCM world. I hope that this will calm everyone down a bit now, and we can move on to bigger and better things. "Can't We All Just Get Along" comes to mind. I know I am happy now. Have a great day Gentlemen.

[notnodak]

I have 6 different noise eliminators I'll offer up. You wrap your esc lead around one a few times up close to the RX and it helps with radio interference on brushless with non/DSM radios.

[Krawlin]

Would anyone happen to have some spare plastic 66 tooth 3906 E-Maxx plastic spur gears, or preferably a steel 66 tooth spur gear setup?

My Medusa 36-80 shaved the teeth off my only remaining 66 tooth spur gear...

[Metallover]

I've got a need for an old set wheels mainly for testing. I want something 10th scale size or maybe a little bigger with a 12mm or 14mm hex to test on my crt .5. The truck has an outrunner so tire size is the only way to test gearing. I don't want to plunge right in and buy a new set of $50 tires just to find out my system runs too hot on that...

If anyone could help me out that would be great.

[BL_RV0]

Riley- ebay has some cheap 1/10 wheel sets, can be had for $30ish

[_paralyzed_]

Originally Posted by Metallover

I've got a need for an old set wheels mainly for testing. I want something 10th scale size or maybe a little bigger with a 12mm or 14mm hex to test on my crt .5. The truck has an outrunner so tire size is the only way to test gearing. I don't want to plunge right in and buy a new set of $50 tires just to find out my system runs too hot on that...

If anyone could help me out that would be great.

i've got old school t-maxx wheels. could send them with the hexes?

[BL_RV0]

Originally Posted by Krawlin

Would anyone happen to have some spare plastic 66 tooth 3906 E-Maxx plastic spur gears, or preferably a steel 66 tooth spur gear setup?

My Medusa 36-80 shaved the teeth off my only remaining 66 tooth spur gear...

I have a new 62t plastic emaxx spur gear. Want it?

[Metallover]

Originally Posted by _paralyzed_

i've got old school t-maxx wheels. could send them with the hexes?

What's the diameter of those wheels? I'd probably be interested.

[BL_RV0]

3.2"