Serpent 960 Brushless

its time for a decent motor...cool setup by the way...do you have any video?

[samwong]

Originally Posted by azjc

its time for a decent motor...cool setup by the way...do you have any video?

I have the video...

and will upload to youtube soon...

It requires around 1/3 of throttle...to overtake others 1/10 Gas Power ... horrible...just like a fast-forward movie... if not watching other cars..

[Ryu James]

your setup looks great. i have converted a 1/8 on road in the past and have seen quite a few online and have never come across anyone the blew their rotor. i am thinking it is the quality of your motor. if you want to stick with 4s i would recommend a Neu 1515 or 1512 1.5D or if you are willing to add some weight and go up to 6s then Neu 1515 1.5y or similar. just look at the KV ratings and go with what suits your needs but i am confident a Neu motor will hold up much better than the one you had previously. good luck.

[samwong]

Here it goes....

4s 6000mah Lipo + 2100kv -> 23mins play approx.
http://www.youtube.com/watch?v=LystnlbZ0Vg
http://www.youtube.com/watch?v=GhIJHNzF5Z4

5s 6000mah Lipo + 2100kv -> 15mins play approx.
http://www.youtube.com/watch?v=eSr_mvYjCRw

[jahno30]

Originally Posted by samwong

Here it goes....

4s 6000mah Lipo + 2100kv -> 23mins play approx.
http://www.youtube.com/watch?v=LystnlbZ0Vg
http://www.youtube.com/watch?v=GhIJHNzF5Z4

5s 6000mah Lipo + 2100kv -> 15mins play approx.
http://www.youtube.com/watch?v=eSr_mvYjCRw

Is that correct, you got more run time with the 4S ?

[samwong]

Originally Posted by jahno30

Is that correct, you got more run time with the 4S ?

because it is slower...u know... logical..