RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Truggy

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#1)
Steve182
RC-Monster Carbon Fiber
 
Steve182's Avatar
 
Offline
Posts: 59
Join Date: Oct 2008
Location: Connecticut
02.15.2009, 02:56 PM

Cool, looks like I'll just have to make sure I check my gear mesh twice on this rig.

Another question now on battery and motor combinations. I think Im gonna go with the Castle 2200kv motor and am trying to decide between the 4s and 5s Zippys. I will be using the Kyosho 46t spur, and not sure on the pinion yet.

Any recomendations?


| Hyper 8 Pro- MMM, Castle 2200kv / Zippy 4s 5000mah
| Jammin CRT- MMM, Feigao 10XL, 5s Zippy 5000mah
| Savage Flux- Castle 2200kv Combo, 6s Zippy 4000mah

Last edited by Steve182; 02.15.2009 at 03:04 PM.
  Send a message via AIM to Steve182  
Reply With Quote
Old
  (#2)
lincpimp
Check out my huge box!
 
lincpimp's Avatar
 
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
02.15.2009, 03:18 PM

Quote:
Originally Posted by Steve182 View Post
Cool, looks like I'll just have to make sure I check my gear mesh twice on this rig.

Another question now on battery and motor combinations. I think Im gonna go with the Castle 2200kv motor and am trying to decide between the 4s and 5s Zippys. I will be using the Kyosho 46t spur, and not sure on the pinion yet.

Any recomendations?
5s and gear it down slightly. 4s requires good batteries to perform optimally.
   
Reply With Quote
Old
  (#3)
lincpimp
Check out my huge box!
 
lincpimp's Avatar
 
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
02.15.2009, 03:26 PM

Keep in mind that you will ne going from a 62t spur to a 46t spur... You will need some small pinions.

Here is the setup with the 46t kyosho spur, and a cc 2200 motor on 4s lipo...

Differential Ratio: 3.3076923076923075
Transmission Ratio: 1
Other Ratio: 1
Spur Tooth Count: 46
Pinion Tooth Count: 11
Total Voltage: 14.8
Motor KV: 2200
Tire Diameter (inches): 5.75
Tire Ballooning (inches): 0
Motor Current Draw: 0
Motor coil Ω: 0
Spur/Pinion Ratio: 4.18 : 1
Total Ratio: 13.83217 : 1
Tire Circumference (inches): 18.06 inches (458.83 mm)
Total Motor Speed: 32560 RPM
Vehicle Speed: 40.27 mph (64.68 km/h)
Effective KV Value: 2200

If you do not change the diffs you will most likely have to stick with 4s, as 5s will require tiny pinions to work. As far as 4s lipos go in the zippy line, the flightmax 5000 30c 4s pack is most likely the best bet. You really need the lsp diffs to give you some more gearing options with the kyosho spur.

Now if you stick with the stock spur, and go to 5s:

Differential Ratio: 3.3076923076923075
Transmission Ratio: 1
Other Ratio: 1
Spur Tooth Count: 62
Pinion Tooth Count: 12
Total Voltage: 18.5
Motor KV: 2200
Tire Diameter (inches): 5.75
Tire Ballooning (inches): 0
Motor Current Draw: 0
Motor coil Ω: 0
Spur/Pinion Ratio: 5.17 : 1
Total Ratio: 17.08974 : 1
Tire Circumference (inches): 18.06 inches (458.83 mm)
Total Motor Speed: 40700 RPM
Vehicle Speed: 40.74 mph (65.44 km/h)
Effective KV Value: 2200

This would be a better setup. I would still suggest the flightmax 5000 30c 5s pack for this. It will weigh more, but you wil get longer runtimes, and the equipment should stay cooler with the lower gearing. Plus you can go up a bit on the gearing, 13 or 14t spur and pick up speed without over drawing the batt.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com