Pay-It-Forward 2009 - Page 19 - RC-Monster Forums

pedeboi364 · 02.23.2009, 03:58 PM

jerry, want a set of stock maxx arms? im looking for some 2.5 driveshafts... also have a slew of rc18 parts

shizzon · 02.23.2009, 04:22 PM

I have an original emaxx equipped with spools front and rear as well as MIP cvd's. This truck is without electronics, but i can include an EVX2/titans as well as Traxxas 3 channel radio/receiver if needed. This truck has been somewhat of a "donor" vehicle, so some of the small pieces are missing or in use on another vehicle, I also have the proline servo saver kit for this truck.

Im open to trades, tell me what you got!

pedeboi364 · 02.23.2009, 05:02 PM

ygpm shizz!!!! man i want an emaxx.... lol, jerry ur makin me jealous!!!

JERRY2KONE · **Sure. -** 02.23.2009, 07:24 PM

Quote:

Originally Posted by pedeboi364

jerry, want a set of stock maxx arms? im looking for some 2.5 driveshafts... also have a slew of rc18 parts

We will take whatever old Maxx stuff you have for the family Maxx builds. We have two stock trucks now up and running so far. I just received a box with enough to build another one for our daughter, and we still plan for the wife to build one as well. I am enjoying teaching them to build these on their own. What a great way for them to learn about our hobby, and good one on one time for each of them. Just let me know.

pedeboi364 · 02.23.2009, 07:26 PM

I'll see if i can round anything else up...I'm new to this maxx stuff too tho...

JERRY2KONE · **Info. -** 02.23.2009, 08:20 PM

I know there are a few people watching over this thread and since this is a Pay it Forward thread why not mention what we are doing along this line. In case some of you have missed out on another project that we are doing please take a peak in the Project-X group for the thread with the gooses and the golden egg post. We are trying to pay it forward in a big way, and can use some help if you are willing. This thread is what pay it forward is really all about. No strings attached, or obligation just for looking. This is for a good cause, so please check it out and see how you can help in the way that the RCM gang has always helped. Thanks guys.

pedeboi364 · 02.23.2009, 08:22 PM

Yup, it's a good cause for a good guy we all have gotten info/laughs/opinions from on this forum. We're pretty close to getting a standard notebook, but let's give him a lil' extra, eh?

Krawlin · 02.26.2009, 10:47 PM

Anyone have a body for a Jammin X1-CRT they would be willing to part with? New or used, painted or clear, I don't mind, as long as it's the stock Jammin X1-CRT / Mutilator body. So anyone have one?

Metallover · 03.01.2009, 01:03 PM

I'm still needing two 12mm hexes if anyone has a couple.

whitrzac · 03:11 PM

does anyone have any hyper 7 elc converson parts for cheap??

motor mount, batt box, bec, pinion?

the motor mount from the hyper 8 will fit too...

I plan on useing a novak 4.5 on a 4s with a tekin RS pro esc...

phildogg · 03.01.2009, 04:11 PM

Quote:

Originally Posted by Metallover

I'm still needing two 12mm hexes if anyone has a couple.

what are they for? I might have a few laying around you need thick or thin
or does it matter?

Metallover · 03.01.2009, 04:41 PM

Quote:

Originally Posted by phildogg

what are they for? I might have a few laying around you need thick or thin
or does it matter?

They are for my crt .5. For some reason I can only find two out of the 4 I need. The ones I have now are 6mm thick. Thanks for looking for me. Tell me what you come up with.

phildogg · 03.01.2009, 05:12 PM

sorry the ones I have aren't very thick. I don't think they are even close to 6mm.
phil

brushlessboy16 · 03.01.2009, 05:13 PM

Just cut them down?

Metallover · 03.01.2009, 05:18 PM

Quote:

Originally Posted by phildogg

sorry the ones I have aren't very thick. I don't think they are even close to 6mm.
phil

Are you sure? Why would they make a smaller hex? Here's a pic of mine-