RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Castle Creations

Reply
 
Thread Tools Rating: Thread Rating: 9 votes, 5.00 average. Display Modes
Old
  (#1)
lincpimp
Check out my huge box!
 
lincpimp's Avatar
 
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
03.03.2009, 12:16 AM

Quote:
Originally Posted by Pdelcast View Post
I already said in another post that as a rule, Castle Creations does not comment on the performance, usability, fitness of purpose, etc. for other brands.

Besides, I don't have any "Zippy" batteries to test with. I haven't tested "Zippy" batteries. So I don't have any idea whether "Zippy" batteries are fit for the purpose of setups on the MMM. I would also imagine it would matter (A LOT!) what kind of setup you ran (pinion, overall gear ratio, etc.) that you ran (as it is with ALL batteries...)

My suggestion -- run the smallest pinion that gives you the performance you are looking for. And don't try to push anything too hard. At the power levels the MMM runs at, bad things will happen very quickly...

Patrick
Good advice...

Zippys are compareable to maxamps (performace, not price).

I would think that moving a 12+ lb truck at 60+ mph will require a larger mah 30c 6s lipo. I find my 4500mah fp 6s 30c lipo is being pushed hard in the lst (heavier than the flux), and it is geared for 45mph... Some of the new 40c thunderpower lipos look to be the best bet... I have a jet buddy (BVM) who has some of them and says that they are leaps and bounds better than the 30c fp lipos...
   
Reply With Quote
Old
  (#2)
Pdelcast
RC-Monster Titanium
 
Pdelcast's Avatar
 
Offline
Posts: 1,697
Join Date: Mar 2008
03.03.2009, 12:23 AM

Besides,

There's like multiple cell types that you can order with "Zippy" batteries (Korean, Chinese-1, Chinese-2) many different sizes, different discharge rates, etc.etc.etc.... So it would be impossible for me to make any kind of blanket statements.

I guess I'm not sure why people always try to save money in batteries -- they are the most important part of the system. Poor batteries mean poor performance, and good batteries mean good performance. So buy the best batteries you can afford, and skimp on the "bling" parts.


Patrick del Castillo
President, Principle Engineer
Castle Creations
   
Reply With Quote
Old
  (#3)
lincpimp
Check out my huge box!
 
lincpimp's Avatar
 
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
03.03.2009, 12:45 AM

Quote:
Originally Posted by Pdelcast View Post
Besides,

There's like multiple cell types that you can order with "Zippy" batteries (Korean, Chinese-1, Chinese-2) many different sizes, different discharge rates, etc.etc.etc.... So it would be impossible for me to make any kind of blanket statements.

I guess I'm not sure why people always try to save money in batteries -- they are the most important part of the system. Poor batteries mean poor performance, and good batteries mean good performance. So buy the best batteries you can afford, and skimp on the "bling" parts.
More good advice...just remember that alot of people in this hobby are on a budget... Don't laugh too hard!! I always tell people to take up a cheaper hobby, like quilting, if they cannot afford the good stuff.

It is really all your fault Patrick, you are selling this great equipment way too cheap...
   
Reply With Quote
Old
  (#4)
kvrc
RC-Monster Stock
 
Offline
Posts: 26
Join Date: Feb 2007
03.03.2009, 10:52 AM

[QUOTE=lincpimp;266433]Good advice...

Zippys are compareable to maxamps (performace, not price).

with all due respect i dont think that is an accurate statement. myself and many of my racing buddies have had maxamps packs and now zippy 4s 5000 h and r packs in our 1/8 scale racing buggys.
i can tell you that the zippy packs are much better at holding voltage under load and producing power. the guys i am speaking of have raced 1/8 buggys going on 3+ years in southeast michigan so we have a lot of time on them.
also many of these guys have the higher end enerland based packs as well and they say that those packs may stay in balance a little better if ran down close to dumping. but for twice as much money i guess they should.
   
Reply With Quote
Old
  (#5)
lincpimp
Check out my huge box!
 
lincpimp's Avatar
 
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
03.03.2009, 12:57 PM

[QUOTE=kvrc;266512]
Quote:
Originally Posted by lincpimp View Post
Good advice...

Zippys are compareable to maxamps (performace, not price).

with all due respect i dont think that is an accurate statement. myself and many of my racing buddies have had maxamps packs and now zippy 4s 5000 h and r packs in our 1/8 scale racing buggys.
i can tell you that the zippy packs are much better at holding voltage under load and producing power. the guys i am speaking of have raced 1/8 buggys going on 3+ years in southeast michigan so we have a lot of time on them.
also many of these guys have the higher end enerland based packs as well and they say that those packs may stay in balance a little better if ran down close to dumping. but for twice as much money i guess they should.
Maybe not the best comparison I have made... I definately think zippy lipos are better than maxamps stuff... The chinese cells are getting much better. As far as cell design goes, the enerland cells are still better. The tabs bigger, twice the surface area, and at least 3 times as thick. Quality control is much better too. Zippy pack construction is iffy at times... The zippy r packs appear to be enerland cells, but I do not see them for sale anymore...
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com