e-maxx redneck mods

[MetalMan]

Jato spurs are 0.8mod though.

[Jason]

im just back from measure the stock e-maxx tires/wheels

the result for this stock 4 wheels/tires are :

2.5 Pounds

[mkrusedc]

Yep, your biggest weight savings can be tires. Check out the site below. I don't know how accurate it is but it will at least give you a reference.

http://www.myrcbox.com/misc_tires_comparaison.htm

[Jason]

yes I know this website I was looking at it too

and now do someone can refer me for good ligtweight wheels ?

since I dont have find some comparaisons on the internet.

[mkrusedc]

Proline dish wheels should work.

[Metallover]

I heard the stock E-savage tires are really light.

[suicideneil]

2.5lbs is light in my book (4lb of Imex awesomeness on my truck).

Look into the 1/8 truggy wheels and tyres- some very good tread patterns for grip and handling, but thats out of my area of expertease really.

[Jason]

I received my motor feigao 540c 8xl finned can and my 19t pinion dont mesh with the 58t jato spur ( mod 0.8 ) because of the finned can.. so now I would give a try to 20 and 21t pinion im pretty sure 20t would work fine..

[mkrusedc]

Originally Posted by Jason

I received my motor feigao 540c 8xl finned can and my 19t pinion dont mesh with the 58t jato spur ( mod 0.8 ) because of the finned can.. so now I would give a try to 20 and 21t pinion im pretty sure 20t would work fine..

...or grind down the fins. (another redneck mod)

[Jason]

I grinded down the fin and I get only a good 70% mesh with the 19t pinion so with the 20t it would be perfect

[Jason]

how it would this gearing guys ? 58/20 and 58/21 with feigao 540c 8xl finned can on 12 cells ?

top speed around 33 to 35mph...