Novak Ballistic motors

10,500 RPM/Volt motors... i thought castle was crazy with 9000 rpm/volt.

linc have you actually broken the sensor before?

[lincpimp]

Originally Posted by e-rev project

10,500 RPM/Volt motors... i thought castle was crazy with 9000 rpm/volt.

linc have you actually broken the sensor before?

I have ripped the wire out a few times.

Plus you now have a stand alone sensor assy, stick that on the back of a hacker c50 and you will have a more powerful sensored motor. Not that simple, but you get the point. Hopefully novak will bring out some larger motors, and a 6s capable esc...

[snellemin]

Originally Posted by e-rev project

10,500 RPM/Volt motors... i thought castle was crazy with 9000 rpm/volt.

linc have you actually broken the sensor before?

The 2.5T that I'm using is 13800kv
The 3T x12 LRP is 11600kv

Originally Posted by lincpimp

Eyeball this:http://www.teamnovak.com/products/br...ors/index.html

I am excited about the removeable sensor assy... Looks like good stuff. I think I may have to pic up a 3.5r for my speed M03... Already have the gtb.

Yes, I noticed the removable sensor plug as well. Finally!! If they made a 3T-1.5T I would get one....unless I find one cheap enough later on.

[scarletboa]

Originally Posted by snellemin

The 2.5T that I'm using is 13800kv
The 3T x12 LRP is 11600kv






Yes, I noticed the removable sensor plug as well. Finally!! If they made a 3T-1.5T I would get one....unless I find one cheap enough later on.

holy crap! a 13800kv motor will spin at 51k rpm on just a 1s lipo. i wonder how a motor like that would do in a rustler on a 10,000mah 1s2p lipo?

[SpEEdyBL]

Originally Posted by scarletboa

holy crap! a 13800kv motor will spin at 51k rpm on just a 1s lipo. i wonder how a motor like that would do in a rustler on a 10,000mah 1s2p lipo?

You would need a huge fan over your esc and some pretty thick gauge wires if you wanted to complete a whole run!