RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old
  (#31)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
03.20.2009, 08:33 PM

IMO, 42k rpm isn't really that high on a quality motor. The good motors are rated up to 50-60k rpm. Of course we shouldn't run them near that high, but 42k is only 70% of the 60k max, so it should be just fine. And true, the efficiency of an unloaded (or very lightly loaded motor) isn't great, but in a vehicle geared for anything over 14mph, it should be more than enough load. Besides, that 42k rpm is probably using the unloaded kv, so it will drop the more current you pull.

It's one thing if you were doing speed runs only hitting WOT all the time because it was geared so low, but on a track, the throttle is mostly somewhere in between slow and WOT.
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com