lipo low cell

[ilpufxit]

I'm no lipo expert, Linc fixes mine for me but those numbers look pretty close to me. How's the pack performing?

the reaosn i ask is because. i only get like 10 minutes out of it before the lvc kicks in. then i test it and it is still showing 11.5 volts total. I will run it down again and check the cell individual numbers.

[lincpimp]

Originally Posted by Dubs chops

the reaosn i ask is because. i only get like 10 minutes out of it before the lvc kicks in. then i test it and it is still showing 11.5 volts total. I will run it down again and check the cell individual numbers.

How about the lipo info and your setup info too. Sounds like you are pulling it too hard, but I need more info to advise...

it is a zippy 3s 20-30c 5000mah.

I am thinking it has a bad cell. I checked it after i ran it yesterday and one cell was down but returning by the time i got it checked. it was .3 away from the othersbut heading back up. so I am thinking it is a weak cell.

link, this was in my backslash converiosn. it is a slash running 1/8 truggy wheels and tires. on a mamba max and vxl motor.

geared. 22-76