Upcoming Castle Outrunner Motors

[What's_nitro?]

Originally Posted by sikeston34m

Provided the shaft is not a press fit alone.

Provided the shaft has set screws, then it is moveable or replaceable.

Just looking at the pictures, I believe mods are possible.

I'm just waiting for them to be released.

Mods are always possible.

[TexasSP]

Thanks for the vid Patrick. Anyone who has the tiniest interest in heli's should join helifreak, it's a great forum.

That's some serious power on a huge heli!

[sikeston34m]

Originally Posted by sikeston34m

Aren't they pretty?

Any word or updates on the Castle Line of Outrunner Motors?

[himalaya]

The above pic said Q1 2009, now it's Q1 2010, one full year has passed.

Actually I am asking for the availability of the CC-Neu 2025 inrunner motor, been waiting for a while.

[hemiblas]

That video is amazing. After 6 months and hundreds of hours on the sim I can now hover in place tail in with a 450 heli and putt around a bit. Learning how to fly helis take a lot of dedication and research.
I definetly would like to see some Castle offerings in the outrunner department. Right now a castle motor for a 450 size heli would be nice and a couple of outrunners in the 35 x 30mm range for some nice 3d flying.

[Unsullied_Spy]

3536 Must have, make my SuperCub do unholy things.

[sikeston34m]

Did this outrunner line "project" fall off the back burner?

[Pdelcast]

Originally Posted by sikeston34m

Did this outrunner line "project" fall off the back burner?

Kind of -- we decided the 34mm motors were not really a good fit.

We have a 52mm and a 45mm motor being released shortly (TRex 700 and TRex 600 applications)

After those, we are doing some smaller motors pretty soon...

Thanx!

Patrick

[TexasSP]

Those 700's are bada$$! Would hate to get hit by one that went out of control with a big outrunner powering it though.