Lipo's for a 1/16th slash?

[kraegar]

I'm at work and can't find measurements for the battery compartment for the 1/16th e-revo & slash. Wanted to get some ordered today.

Anyone have the measurements handy, or can recommend some good 2s Lipos to fit?

I was thinking about these:
http://hobbycity.com/hobbycity/store...idProduct=8935

Thanks!

Tony

[schofield]

i just called traxxas and they said

inside dimentions
102 mm - length
35.5 mm - depth
20.3 mm - hight

[Metallover]

With hobbycity measurements add a couple mm's to each dimension because the measurements are rarely accurate and in most cases are the dimensions of the cell without wires and shrinkwrap.

[kraegar]

Those Turnigy's may be a bit too tight of a fit... perhaps these Zippys...

http://hobbycity.com/hobbycity/store...idProduct=6540

[kraegar]

Originally Posted by Metallover

With hobbycity measurements add a couple mm's to each dimension because the measurements are rarely accurate and in most cases are the dimensions of the cell without wires and shrinkwrap.

Good to know, thanks! Think I'm ok with those Zippys?

[rawfuls]

Nooot exactly.
Those Turnigy's come with I think 10GA wires.
Way too beefy.
I'd put em down to 12-14GA, I'm pretty sure 10GA won't fit in the stock boxes.

[kraegar]

How about the Zippys? Looks like they should fit by the measurements, but given the above, would I be ok?